I need routing belt diagram for 2005 pacifica 3.5L

If I remember correctly, it should be behind the inner wheel liner on the drivers side behind the bumper. Just pull the drivers wheel and the liner is easily accessible.

hi Robert.
this link will show you some diagrams might help you out.
Belt diagram for 2008 pacifica 3 8 serpentine routing Google Search
or this might help you as well.
Belt diagram for 2008 pacifica 3 8 serpentine routing Google Search

Hello josecarrion3: My name is Roger and I will help you. I attached a picture of the belt routing for you. Should You need further help please just ask. Please rate the answer. Thank You for using Fix Ya. Roger

Depends on engine. Copied below diagrams from AutoZone.com:

Drive Belt Routings




Fig. Accessory drive belt routing-2.4L engine



Fig. Accessory drive belt routing-2.7L (3RZ-FE/M) engine



Fig. Accessory drive belt routing-2.7L (2TR-FE) engine



Fig. Accessory drive belt routing-3.4L engine

Please don't forget to rate...thanks a bunch!




Accessory drive belt routing: Alternator (1), Automatic Tensioner (2), P/S Pump (3), Idler Pulley (4), A/C Compressor (5), Crankshaft Pulley (6)—3.5L engine

At Autozone and probably others, the packaging for the belt has the routing diagram on the box.

here are a couple diagrams...




If you need anything else, let me know.

Here is a complete diagram of the belt routing. Below it is a picture of the belt tensioner which will help you find it. The diagram is critical to you in routing the belt when you put it back on.

possibly if you go to autozone.com, there is a area at the bottom of the page refering to manuals. you will have to join with an e-mail address and create a user profile. the cost is 0. after you create your profile, select your vehicle and look up in the free online repair manual. I hope this helps, good luck!

goodyear belts have routing on the sleeve