Changing spark plugs in a 98 toyota camry 3.0 v6

Injector on that cylinder no good or spark plug not fireing.

The back three spark plugs on the V6 are difficult to reach without a socket extension. if part of the engine is hindering you from taking out back plugs. then remove the part thats in the way. then replce when done. have a good day !!

if thats the v6,they are under the camshaft hsg panel,back of the motor

where are spark plugs location 1995 toyota camery v6

you need a spark plug wrench with a universal joint to cover the angle while turning the wrench...

I believe your firing order is 1-3-4-2. You may see a number 1 on the distributor cap on this vehicle. That is the #1 plug wire. The wire hole next to that would go to spark plug 3 etc. Easiest way is to change wires one at a time. Hope this helped.

Make sure you use proper gauge oil.

cant get to the back spark plugs on a 1998 v6 toyota camry

The upper intake has to be taken off to get to them. Yes it is a pain in the but, not too hard to do, just bothersome to do this to be able to change plugs. Make sure to be careful when loosening the intake as the head is aluminum and you can damage it if you take a gung-ho approach. You will need to replace the gasket but it is only around 12 -15 $ .