I amcurrently searching for a diagram to wire up my RPM gage but I don't know where to put the wires!!!! I really need help!! thx:)

These are the best sites for wiring diagrams. Some are subscription sites but you can take just one month cheaply.

https://www.google.com/search?q=1998+dodge+durango+door+locks+wiring+diagram

https://www.google.com/search?q=2003+dodge+durango+door+locks+wiring+diagram

..

Hi,

please call Toyota directly in order to ask them to email you the wiring diagram so that you can move forward as quickly as possible.

Thank you.

Try this site,maybe?
http://www.bbbind.com/free_tsb.html don-ohio (:^)

Two heavy gage red wires one from the battery the side goes to the starter . The other is red with a light blue stripe ( small gage wire) Goes to small terminal . Starter solenoid located on inner fender ,engine compartment , not on top of starter ?
You can go to www.bbbind.com/ for free wiring diagrams . On the home page click on technical information five box will come up . Click on tsb's an free wiring diagrams . On the next page go to bottom an click on I agree . Next page click wiring diagrams an then enter your vehicle make, model ,year , engine size. Then under system click on engine , then subsystem click on starting ,then click search . Then click on the blue links one at a time . Do you know how to read a wiring diagram ? At the top you can zoom in closer an on the sides click on the arrows to expand the diagram right an left . The first diagram if you look on the left side near the battery you will see the starter relay has three wires going to it. Good luck hope this helps >

What year car? The factory changes colors or wiring frequently year to year.

my dear friend since you know that really did something which is true,why don't you ask a specialist help to avoid the risk of either blown anything vital on the rest of the car or cause a fire and loose not only the dashboard but the car as well.

If you know what to look for, locate the temp sender unit, sometimes on a manifold, thermostat housing or in the side of the block. Pull the wire off and ground it with the ignition on but not runnong. If the guage maxes out, its the sender, if not probably the guage but don't jump to conclusions. It may be the wire itself, so if in doubt, get help/ and a diagram.

https://postimg.org/image/itm1l95xx/

Click on the link.
You put the starter wires back on the same way they came off. If the wiring diagram doesn't help, not sure where to go from there?

Go to your local Napa parts store, they can print you out a wiring diagram. Or you can buy a repair manual.

Hi,
Here is the wiring diagram

Hope this helps
Thanks
Smith.