The Heads Up Display (HUD) usually fails because of a spring that holds the mirror assembly comes unhooked or pulls through the plastic anchor hole. The HUD unit needs to be removed out of the dash for repair. Several people have epoxied a washer where the original hole was located with very good results. Takes between 2 to 3 hours to repair. Repair instructions can be found on several automotive forums.
Housing and Urban Development (HUD) does not usually get involved with automobiles, unless of course you are living in one. If you mean HOOD adjustment, there are usually between 4 and 6 bolts holding the hood to the hinges. Loosen then up A LITTLE BIT, and try repositioning the hood.. You may also have to adjust the position of the hood latch if you move the hood too far.
SOURCE: hud not seen on winshield but can hear it moving up and down when I press the buttons
Have you ever had the windshield replaced? Or did it just stop working out of the clear blue?
SOURCE: HUD stuck in up position
This just happened to me and apparently is happening to everyone right about now. Solution:
http://www.atthetipwebs.com/technologyinstructions/hud.htm
http://volvoforums.com/forum/showthread.php?t=30039
http://www.grandprixforums.net/f41/problems-my-heads-up-display-04-a-12491.html
1,371 views
Usually answered in minutes!
×