I recently had a rear brake job on my 2003 camry (v6).Since then my ABS and emergency brake light come on after I start driving a few Km. When I stop the lights go out but when I start driving again the lights come back on after only a few minutes. A friend at a garage checked the flashing code and the abs lights flashed 3 times pause, 3 times pause, 3 times pause, and then 9 times. Does anyone know what this code means?

SOURCE: ABS BRAKE LIGHT ON IN MY SUBURBAN/GMC TRUCK

Try diconnecting the battery for a minute or so, then reconnect it. the computer should reset itself, and hopefully the light will go out.

SOURCE: bleeding abs brakes

Try using a pressure bleeder. It will force the air out. Works every time.

SOURCE: ABS Light On

you can take it to autozone they will check it for free and tell you what the problem is and which sensor and which wheel its on ...that way a shop cant tell you you need other parts you dont need. hopes this helps.........

SOURCE: 2007 toyota camry abs & brake lights on

Remove the abs plugs and dry out connections, and replace.Remove the battery wires before you do this.

SOURCE: How Do i manualy reset Fault codes on a daewoo

as most of the "experts" here I only saw standard awnsers.

reset Daewoo ECU:
1. Disconnect - (minus) battery connector for at least 30 secs.
2. reconnect it.
3. turn the ignition key on and of 3 times for 5 seconds (critical!)
4. start engine after 3rd time.

ECU reset is complete.