We lost our remote, but still have a spare key. When we unlock the door with the spare key, the alarm goes off. Is there a way to make it stop without disabling it altogether?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You dont have to wait. Pop the locks. Use wedges to flex the door at the top and a rod to hit the unlock button. When the alarm goes off pop the hood and pull the pos battery cable. Now you can look for your keys without some one thinking you are stealing the car.
you need to get a key made by the dealship and reprogrammed. i had a 999 chrysler lhs in my shop ,and I lost the key,and I had to send to the dealership
mine does the same thing and all you need to do is jump in and start it for it to stop but you go in and staryt meesing with things ist gonna mess up something
You must have a spare key. When your alarm is going off have your key in the ignition, wait it out. When your alarm stops in approximately 30 seconds keep the key in the ignition exit the vehicle and lock the doors (don't forget your spare key). Go to the passenger door with the spare key and unlock the doors and turn the key that you left in the ignition and it should start right up. Just worked for me.
if you unlock the driver door before opening it with the key you can turn the alarm off. Also taking it to a electronics place and having a keyless entry system will bypass the factory alarm as long as you tell them to hook it up and in most cases its less than buying a new factory remote. Also if you dont lock the car with the lock button from the driver door before you close the door the alarm will not arm.
yes the remotes do have batteries. how ever that might be your problem or the remotes lost its code for programing. step when turning alarm off---- if its a factory alarm put the key in the drivers door when the door is closed and lock then unlock it thats the manuel shut down for factory. step 2------- aftermarket alarm. look for a valet switch most likely it would be installed by the driver kick panel or by the under dash fuse box. when u find it put the key into the ignition. turn it to the run position. within 3 seconds press and hold the valet switch for 3 to 5 seconds you should here a confirmation chirp and the led light will stay on solid and wont blink give it a world let me know what happens
Lock all the doors from the inside (with all the doors closed), unlock your driver's door by manually lifting the lock, then press it back down after you are out - this will prevent the alarm from sounding when you use the key to unlock the door.
×