At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The clearance, or gap, of the valves on a 2002 Mitsubishi Lancer OZ Rally is the distance between the valve and the valve seat when the valve is in the closed position. The clearance is typically specified by the manufacturer and is measured in thousandths of an inch.
To determine the valve clearance for your Lancer OZ Rally, you will need to refer to the manufacturer's specifications or service manual for your specific model. The valve clearance may vary depending on the type of engine and the specific application of the vehicle.
It is important to maintain the correct valve clearance on your Lancer OZ Rally to ensure that the engine operates efficiently and effectively. If the valve clearance is not within the specified range, it may cause problems such as reduced engine performance, increased fuel consumption, and increased emissions.
To adjust the valve clearance, you will need to remove the valve cover and use a feeler gauge to measure the gap between the valve and the valve seat. If the gap is not within the specified range, you will need to use a wrench to adjust the clearance by turning the adjustment screw on the rocker's arm. It is recommended that you have the valve clearance adjusted by a qualified mechanic if you are not familiar with this process.
90 percent chance no. I would still take the five minutes and drain some from the pan. Won't even have to take the plug all the way out for the little bit.
I am really impressed in your blog.....and Thank you for sharing this information...It is Very interesting..<a href="http://www.pcmofnc.com/"> Trailblazer SS parts</a>
honestly no idea ,you would need some dealer only information and doubt they will tell you but do a shrewdy and ask in the stores what the difference is ..
×