1998 Chrysler Town & Country Logo
Posted on Sep 29, 2009

Security alarm on so car won't start

I have a 1998 Chrysler Town & Country and when my sister open the passenger side door by sticking her hand in the window the alarm system went off and now I can't crank up the car. what do I need to do to get the alarm off so the car can run???any suggestions would be appreciated.

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Oct 14, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Oct 14, 2009
Answers
1
Questions
0
Helped
1778
Points
1

24,
Try locking/unlocking the passenger door with the key into the door lock to reset the alarm system. If the passenger side doesn't work, then try the driver side. Good luck.

  • Jose L Nogueras Jun 27, 2011

    it work only on the back gate door. Our 1999 Town & Country would not start at all, not even a click. prior to that would start then die or alarm would turn on and stay on. An hour later unlocking and locking the back gate with the key disable the alarm just by pure luck. Just happened minutes ago. We did try many things over 2 days. Hope it works for all. Jose , Kissimmee FL.

×

willie

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Sep 24, 2013
willie
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Sep 24, 2013
Answers
1
Questions
0
Helped
1778
Points
1

What if my keys don't match the locks in the doors?

Ad

1 Related Answer

Willie Keisser

  • 457 Answers
  • Posted on Jul 31, 2011

SOURCE: 1998 Chrysler town and country van won't

use the key in passernger door and lock it then do the same on driverside then go back to the passenger side and unlock with key then driverside this wil reset the alarm and the vehicle should start.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1998 Chyrsler Town and Country Anti Theft system won't disarm

1St make sure your using the same key you always do not your spare or something that was cut new. also read your book on security usually there is a period of leaving the key in the ignition for so long so it will recognize this is the right key.
1helpful
1answer

2001 Town and Country 3.8 When I open the driver's side door the alarm will go off and won't stop until I start the car.

There is a 2 wire switch that goes on the backside of your door lock cylinder. Prob got knocked off when u were in there. Till u can look just unlock the pass door or the lift gate with key and that will shut alarm off
0helpful
1answer

1998 Chrysler town and country van won't start. I would like to know how to disarm my alarm system so car will start.

use the key in passernger door and lock it then do the same on driverside then go back to the passenger side and unlock with key then driverside this wil reset the alarm and the vehicle should start.
0helpful
1answer

Alarm button broken. Cannot disarm alarm. What do I do? Chrysler Town & Country LX 2003 model.

You can arm or disarm alarm manually with the key at the drivers side door, turn the key to open the locks and the alarm must be disarmed.
0helpful
1answer

2001 Town and Country 3.8l LXi When I open the each the passenger or driver side doors the alarm will go off..wont stop until i start the car. Does not happen when the doors are opened with the key...

the door does not have a key reccognition system,only the ignition,
so if you use the key,without first disabling the alarm,the alarm will go off,SO use the remote to unlock the car and the key to start it....no problem....
4helpful
2answers

Where is the fuse box located on a 2001 chrysler town and country van

The fuse box in under the hood. It's in the top right hand corner just to the right of the battery. It says "Fuse" on it.
0helpful
1answer

Looking to replace passenger side mirror on a 2006 Town and Country. Anyone have Instructions available?

    Remove Old Mirror
  1. 1 Open the side door to the Chrysler Town & Country, and find thescrew that holds the side mirror molding in place.

  2. Take the screw out and remove the molding panel that attached around the outside of the power mirror.

  3. Remove the bolts connecting the mirror to the door assembly. If equipped, unplug the power side view mirror wiring harness connector.

  4. Unplug the electric connectors, and pull the mirror out of the molding.

0helpful
2answers

Town & Country the Power locks

check the switches in the door pillars first then the rubber boot where the cables go from the door to the door pillar
3helpful
1answer

My car alarm will not reset and the issue with problems below

If you (hopefully) have the key fob (keyless entry remote), try closing the doors, then lock and unlock using the keyless entry. This should reset the security so the vehicle will start.
Not finding what you are looking for?

1,788 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...