At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
replace the window regulator/motor assembly...you'll find it at most auto parts stores here is a listing at autozone http://www.autozone.com/autozone/parts/2000-Mazda-MPV-2WD/Window-Lift-Motor/_/N-jermuZ9ck77 as far as the procedure, there are a few screws to take out and pop the door panel off, then the regulator thing is only a couple of screws...easy project. should take about 30 min. to complete. have fun!
Remove the door panel, disconnect the window from the regulator. Push the window all the way up. Secure it either with duct tape, or prop good with screwdriver. Do not let it fall down. You should be able to work inside the door now to get the bolts and screws out to remove the motor and regulator.
Remove door panel to check wiring to switch and motor See if motor is getting power through the switch - if so motor is bad If no power to motor check operation of switch - jump wires to test if window works bad switch
NO not really just make sure you have the window is all the ways up and hold it with duct take to keep it from coming down.Remove the motor and unplug the harness.Install the new one and plug it in .Its that easy
-Both switches (Driver side and passage side) do the same thing ?-If so then there is a bad connector at the motor. Power line or ground.
-But can't open only on 1 switch. Then that switch is worn out.
if you do not here the motor then its the regulator or motor that needs to be replaced/ cif you hear the motor check the control switch on the trim panle coould be just a five dollar part to replace/ Please rate my response thank you very much
The firing order is 1-4-2-5-3-6. The cylinders are, front bank is from drivers side to passenger, 6-5-4 , and 3-2-1 at the firewall. This is for a 2004 Mazda MPV.
×