I have a power acoustik ptid-8920b, it works amazingly in my 04 Chrysler Sebring but when I switch it to my 04 Dodge Durango it has problems. So when I switched the radio out to the Durango the only thing that won't work is power, my screen will pop out and lcd lights will come on screen says open and close but I cannot turn the unit on at all. I've checked wiring and even compared to sebrings wiring, checked fuses, checked grounds and positives all looked fine and correct even compared with wiring harness from other radio and still nothing looks wrong, what could it be?

SOURCE: milage odometer on 1997 Chrysler Sebring doesn't work

i got a better way you to fix it http://members.cox.net/dpeters30/97_sebring_dash.htm it free if you know how to solder. It works I did it this june and it still works

SOURCE: Power Windows won't work

Fuse is good you say? There are four may possible causes listed in this diagnostic article:

http://yourhandymanzone.com/Your_Handyman_Zone_How_To_Pages_Vehicle_Car_Zone_Cars_Trucks_Vans_Windshield_Windows_Window_Does_Not_Roll_Up_Down.htm

Good luck!
Brad

Donnie Matney

• 426 Answers
• Posted on Jun 21, 2009

SOURCE: No Bus on dash

make absolutely sure nothing is maybe not plugged in all the way. like pcm harness.

SOURCE: I HAVE A 2005 CHRYSLER SEBRING AND DOME LIGHT,RADIO ALL POWER LOCKS HAVE QUIT WORKING

me too! - looking at fuse #5 red 10 Amp one but has black thing on it.

Can't get if off..

Have read the manual is wrong and to use panel on side of fuse box for fuse locations...

SOURCE: Power Windows are dead

It sounds like your electrical window regulators are the problem, you might want to remove the door panels and check the connection to the regulators, hope this helps. God Bless.

Willie