Question about Cars & Trucks

2 Answers

Derrick Shultz and Lidia Harper - Indian spammers? Replaced transfer case shift motor now service 4x4 light is on

Posted by on

  • LydiaHarper Dec 11, 2019

    For all of dads and moms that love to stay home to take care of their loved ones, or rest of people on the search for an opportunity to pull in some extra income for their family month after month let me share a remarkable opportunity to explore...Go to this SITE for more INFO just copy and paste.........w­­­­­­­w­­­­­­­w­­­­­­­.­­­­­­­F­­­­­­­o­­­­­­­x­­­­­­­1­­­­­­­2­­­­­­­0­­­­­­­.c­­­­­­­o­­­­­­­m

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 10,079 Answers

Ya just get a help manual for repair. simple! I have repaired a lot of cars mine and my frnds cars and bikes using e manuals only.. u will find it on www.reliable-store.com
Just try to get one asap it's on sale these days..

Posted on Dec 11, 2019

Ad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 796 Answers

The 4X4 service light was not on with the original shift motor in place? Is the new shift motor new or used? I can only guess the replacement motor is defective, not correct for your model vehicle or the transfer case has internal damage. I would like to know the Year, Make and Model. Look around and tell me if the transfer case allows the motor to change position. Remove the motor and test by rotating the rod. Will it rotate to other positions? Check for a blown fuse. If this checks out ok then the motor or related wiring could be to blame.

Posted on Dec 11, 2019

  • LydiaHarper Dec 11, 2019

    For all of dads and moms that love to stay home to take care of their loved ones, or rest of people on the search for an opportunity to pull in some extra income for their family month after month let me share a remarkable opportunity to explore...Go to this SITE for more INFO just copy and paste.........w­­­­­­­w­­­­­­­w­­­­­­­.­­­­­­­F­­­­­­­o­­­­­­­x­­­­­­­1­­­­­­­2­­­­­­­0­­­­­­­.c­­­­­­­o­­­­­­­m

×

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Anonymous

  • 5 Answers

SOURCE: 2003 Ford explorer transfer case and shift motor problem

need more information on this one.

Posted on Feb 17, 2010

ZJLimited

ZJ Limited

  • 17970 Answers

SOURCE: why does the service 4X4 light keeps coming on I have

Probably you need rest this warning light; check this procedure...

Chevrolet Suburban -
2000-01
GMC Yukon XL, Chevrolet Silverado,GMC Trucks Sierra - 1999-00

Turn the ignition key to the RUN position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the CHANGE OIL SOON light flashes 2 times, the system is reset. However, if the light comes on and stays on for 5 seconds, the system did not reset. Repeat the procedure if the system does not reset.

Tell us news.

Posted on Jun 17, 2010

kmac4158

  • 22 Answers

SOURCE: 2002 dodge durango 4.7 4x4 4DR - The four wheel

check for a blown fuse

Posted on Jul 03, 2010

FUBAR

  • 1168 Answers

SOURCE: 1998 linclon navigator will not go into 4 wheel

Hello.
I replace the vacuum solenoids on these models regularly.
Here is where they are located. #4 at the top.The vacuum reservoir is #3.
Make sure there are no broken lines.
These solenoids are known for corrosion due to their location.

kiltylake_62.gif

Here is the vacuum diagram for the system.
kiltylake_63.gif
There you are. That should take care of your problem.
Thank you for using FixYa.

KL

Posted on Dec 01, 2010

dgrimes222

  • 1 Answer

SOURCE: 1996 Yukon 4X4 Electronic Shift on Fly.

I had the same problem with the shift on the fly push-button 4x4 on my 97 Suburban. GM Shop manual indicates that it could be due to an encoder error on the actuator motor. Try pulling the transfer case fuse to reset the transfer case control module. Wait at least one minute. Re-install fuse then re-try operation. Did it last week and that saved me a trip to the dealership and extensive troubleshooting.

Posted on Jan 03, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I own a 02 foard explorer shift motor was bad i think and i removed it, i started it to relocate it, installed the new shift motor


Don's 1999 Ford Ranger shift motor PROBLEM SOLVED ...

? 13:05
https://www.youtube.com/watch?v=wcn39gwPWfI
Oct 1, 2013 - Uploaded by gtarman49
Don's 1999 Ford Ranger shift motor PROBLEM SOLVED. ...How to find replace fix 4x4 transfer case shift module 2002 Ford Explorer 4 wheel ...

How To Install Replace 4x4 Transfer Case Shift Motor Ford ...

? 9:15
https://www.youtube.com/watch?v=9ldrtZODxQ8
Oct 26, 2010 - Uploaded by 1A Auto Parts
How To Install Replace 4x4 Transfer Case Shift Motor Ford Explorer .... transfer case shift module 2002 Ford Explorer 4 wheel drive not working ...

How to find replace fix 4x4 transfer case shift module 2002 ...

? 3:07
https://www.youtube.com/watch?v=sZw3SS2Pt-4
Nov 3, 2013 - Uploaded by kirk colombo
... transfer case shift module 2002 Ford Explorer 4 wheel drivenot working ..... I replaced the transfer motor so i think it is the control module.


Jan 08, 2016 | Cars & Trucks

1 Answer

2000 chevy siverado z71 4x4 not working


Yes we can ! With the light on and or flashing , DTC'S - diagnostic trouble codes are stored in the 4X4 control module . Have the codes check , not at auto zone or any other parts stores . There code reader tool will not pull this codes . Need to take to a qualified repair shop . Testing also needs to done , not guessing an throwing parts at it . This 4X4 system can set a number of codes .
DTC B2725 ATC Mode Switch Circuit Malfunction
DTC C0300 Rear Speed Sensor Malfunction
DTC C0305 Front Speed Sensor Malfunction
DTC C0308 Motor A/B Circuit Low
DTC C0309 Motor A/B Circuit High
DTC C0310 Motor A/B Circuit Open
DTC C0315 Motor Ground Circuit Open
DTC C0323 T-Case Lock Circuit Low
DTC C0324 T-Case Lock Circuit High
DTC C0327 Encoder Circuit Malfunction
DTC C0362 4LO Discrete Output Circuit High
DTC C0367 Front Axle Control Circuit High
DTC C0374 General System Malfunction
DTC C0376 Front/Rear Shaft Speed Mismatch
DTC C0387 Unable to Perform Shift
DTC C0550 ECU Malfunction
DTC C0611 VIN Information Error

DTC C0387 Unable to Perform Shift
Circuit Description
The transfer case encoder is a switch that converts a shaft position, representing a mode or range position, into electrical signals for use by the transfer case shift control module. The encoder houses 4 Hall effect sensors that are used for channels P, A, B, and C. These sensors provide a path to ground, when a magnet, (part of the Motor Encoder), passes over them.
The transfer case shift control module supplies an 8 V reference and a ground circuit for the encoder hall effect sensors to function.
The transfer case shift control module supplies current limited 5 V on all the channels, thus as these channels are pulled to ground, the module can interpret the location of the transfer case shift position.
This DTC detects that the transfer case is unable to successfully complete a shift to a requested mode or range.

May 07, 2017 | 2000 Chevrolet Silverado 1500

1 Answer

2000yukondanali


Check the 4X4 switch with a scanner if that is ok check the motor at the transfer case if theres power and ground replace the motor also check the bcm.

Jan 24, 2014 | Cars & Trucks

1 Answer

I have a 2000 4x4 suburban it says service 4x4. I already replaced the switch and the transfer case acuator with the encoder. It still says service 4x4 and it feels like it is in 4x4 when i give a slow...


When you remove the encoder motor, you should be able to manually shift the transfer case. If all is working manually and it "comes out" of 4wd, you may need to have the TCCM reprogrammed.

Oct 26, 2013 | 1999 Chevrolet Silverado 1500

1 Answer

2002 f150 4wd drive not not working,


Transfer Case - Electronic Shift on the Fly (ESOF) Features A rotary switch allows the vehicle operator to choose between 2WD, 4H, and 4L modes of 4x4 operation.
The generic electronic module (GEM) controls the operation of the 4x4 system.
The output shaft speed (OSS), mounted in the rear of the transfer case, informs the GEM of the vehicle speed.
The shift motor sense plate, an integral part of the electronic shift motor, informs the GEM to the positions of the transfer case (go to Table 4).
The transmission range sensor is located on the LH side of the transmission; this sensor informs the GEM when the transmission is in the NEUTRAL position.
The electronic shift motor, mounted externally at the rear of the transfer case, drives a rotary cam which moves the mode fork and range fork within the transfer case to select between the 2WD, 4H, and 4L positions.
The 4x4/4x2 vacuum solenoids are attached to the upper RH side of the engine compartment, and alternately route vacuum to the vacuum motor which engages/disengages the center axle disconnect collar in the front axle assembly.
The 4x4 shift motor relay is a module containing two relays. Under the control of the GEM, the 4x4 shift motor relay shifts the transfer case shift motor between the 2WD, 4H, and 4L modes.
The transfer case clutch relay is an electromechanical relay used to activate the transfer case clutch within the transfer case.


Your best bet , take it to a qualified repair shop !

P1804 Transmission 4-Wheel Drive High Indicator Circuit Failure GEM REFER to Section 413-01A . P1806 Transmission 4-Wheel Drive High Indicator Short Circuit to Battery GEM REFER to Section 413-01A . P1812 Transmission 4-Wheel Drive Mode Select Circuit Failure GEM REFER to the Symptom Chart. P1815 Transmission 4-Wheel Drive Mode Select Short Circuit to Ground GEM REFER to the Symptom Chart. P1820 Transmission Transfer Case Clockwise Shift Relay Coil Circuit Failure GEM GO to Pinpoint Test A . P1822 Transmission Transfer Case Clockwise Shift Relay Coil Short Circuit to Battery GEM GO to Pinpoint Test A . P1824 Transmission 4-Wheel Drive Clutch Relay Circuit Failure GEM GO to Pinpoint Test E . P1826 Transmission 4-Wheel Drive Low Clutch Relay Short Circuit to Battery GEM GO to Pinpoint Test E . P1828 Transmission Transfer Case Counter Clockwise Shift Relay Coil Circuit Failure GEM GO to Pinpoint Test A . P1830 Transmission Transfer Case Counter Clockwise Shift Relay Coil Short Circuit to Battery GEM GO to Pinpoint Test A . P1832 Transmission Transfer Case Differential Lock-Up Solenoid Circuit Failure GEM GO to Pinpoint Test C . P1834 Transmission Transfer Case Differential Lock-Up Solenoid Short Circuit to Battery GEM GO to Pinpoint Test C . P1838 Transmission Transfer Case Shift Motor Circuit Failure GEM REFER to the Symptom Chart. P1846 Transmission Transfer Case Contact Plate 'A' Circuit Failure GEM REFER to the Symptom Chart. P1850 Transmission Transfer Case Contact Plate 'B' Circuit Failure GEM REFER to the Symptom Chart. P1854 Transmission Transfer Case Contact Plate 'C' Circuit Failure GEM REFER to the Symptom Chart. P1858 Transmission Transfer Case Contact Plate 'D' Circuit Failure GEM REFER to the Symptom Chart. P1866 Transmission Transfer Case System Concern - Servicing Required GEM REFER to the Symptom Chart. P1867 Transmission Transfer Case Contact Plate General Circuit Failure GEM REFER to the Symptom Chart. P1876 Transmission Transfer Case 2-Wheel Drive Solenoid Circuit Failure GEM GO to Pinpoint Test C . P1877 Transmission Transfer Case 2-Wheel Drive Solenoid Circuit Short to Battery GEM GO to Pinpoint Test C . P1891 Transmission Transfer Case Contact Plate Ground Return Open Circuit GEM REFER to the Symptom Chart.

Nov 26, 2017 | 2003 Ford F150 Regular Cab

1 Answer

99 Chevy Silverado 4x4 not working No light on 4x4 Selector Panel


Your brake an CV joint issue can't an won't cause your 4X4 problem . The 4x4 system has a control module which supply's B+ voltage to the switch . Checking for codes in the 4X4 control module should have been the first step . Your best bet , take it to a qualified repair shop . You don't have the knowledge or test equipment to fix this.
SERVICE indicator (4WD/AWD) Lamp
The SERVICE indicator (4WD/AWD) lamp is an integral part of the cluster and cannot be serviced separately. This lamp is used to inform the driver of the vehicle of malfunctions within the automatic transfer case (ATC) system. The SERVICE indicator (4WD/AWD) lamp is controlled by the transfer case shift control module via CKT 1567.

Transfer Case Shift Control Module
The transfer case shift control module uses the VIN information for calculations that are required for the different calibrations used based on axle ratio, transmission, tire size, and engine. The system does not know which calibration to use without this information.
The direct battery supply line (CKT 1640) provides the power to the module and motor circuitry.
Transfer Case Encoder Motor
The transfer case encoder motor consists of a permanent magnet (PM) DC motor and gear reduction assembly. It is located on the left hand side (drivers side) of the transfer case. When activated it turns the sector shaft of the transfer case (clockwise or counter clockwise) to shift the transfer case. The encoder motor is controlled with a pulse width modulated (PWM) circuit within the transfer case shift control module. This circuit consists of a driver on both the Motor A and Motor B circuits. The encoder motor is bi-directional to allow the motor to shift the transfer case from 2HI or 4HI to NEUTRAL and 4LO positions.
Do you know what DTC'S are ?
DTC B2725 ATC Mode Switch Circuit Malfunction
DTC C0300 Rear Speed Sensor Malfunction
DTC C0305 Front Speed Sensor Malfunction
DTC C0308 Motor A/B Circuit Low
DTC C0309 Motor A/B Circuit High
DTC C0310 Motor A/B Circuit Open
DTC C0315 Motor Ground Circuit Open
DTC C0323 T-Case Lock Circuit Low
DTC C0324 T-Case Lock Circuit High
DTC C0327 Encoder Circuit Malfunction
DTC C0367 Front Axle Control Circuit High
DTC C0374 General System Malfunction
DTC C0376 Front/Rear Shaft Speed Mismatch
DTC C0387 Unable to Perform Shift
DTC C0550 ECU Malfunction
DTC C0611 VIN Information Error

Aug 27, 2017 | 1999 Chevrolet Silverado 1500

2 Answers

4wd does not work


Electronic Shift On the Fly (ESOF) Operation
The ESOF system is an electronic shift 4x4 system that allows the operator to choose between two different 4x4 modes as well as 2-wheel drive. The operator can switch between 2WD and 4WD HIGH mode at speed. To engage or disengage LOW Range, the vehicle speed must be less than 5 kph, the brake depressed, and the transmission must be in NEUTRAL.

The transfer case is equipped with an electromagnetic clutch which is located inside the case. This clutch is used to spin up the front drive-line when shifting from 2WD to 4x4 High mode at speed. When the control switch on the instrument panel is turned, the generic electronic module (GEM) recognizes that a shift has been requested and activates the electromagnetic clutch and the relays which power the transfer case shift motor. When the shift motor reaches the desired position as determined by the contact plate position inputs to the GEM, power to the shift relays and motors will be removed. When the transfer case front and rear output shafts are synchronized, the spring loaded lockup collar mechanically engages the main-shaft hub to the drive sprocket. Finally, the front axle collar is engaged and the electromagnetic clutch is deactivated.

Shift Between 2WD and 4x4 HIGH:
Shifts between 2WD and 4x4 HIGH can be made at speed. Listed below are the inputs and outputs needed by the GEM to execute a change between any of these modes.

Feature Inputs:
*4WD Mode Switch (Various resistances).
*Contact Plate Position Inputs A, B, C, D (grounded when closed, open circuit when open).

Feature Outputs:
*4x4 Shift Motor Relay Outputs
*Transfer Case Clutch Relay (grounded when relay is on, open circuit when relay is off).
*4x2/4x4 Vacuum Solenoid (grounded when activated, open circuit when deactivated).
*Cluster Indicators (ground when activated, open circuit when deactivated).

Shifting Into/Out of 4WD LOW:
When shifting into or out of 4WD LOW, the GEM requires that the vehicle speed be less than 5 kph, the brake is applied, and the transmission is in NEUTRAL.

Feature Inputs:
*4WD Mode Switch (Various resistances).
*Contact Plate Position Inputs A, B, C, D (grounded when closed, open circuit when open).
*VSS Sensor (Sinusoid Signal: 0.7V-20V, 2.2 Hz/mph).
Brake Input (battery voltage when brake is depress, open circuit when not activated).
*Transmission Range Sensor (grounded when transmission is in NEUTRAL, open circuit otherwise).
8Start/Clutch Depressed Input

Feature Outputs:
*4x4 Shift Motor Relay Outputs
*4x2/4x4 Vacuum Solenoid (grounded when activated, open circuit when deactivated).
*Cluster Indicators (grounded when activated, open circuit when deactivated).

4WD Mode Switch
A rotary switch allows the vehicle operator to choose between 2WD, 4WD HIGH, and 4WD LOW modes of 4x4 operation.

GEM Module
The Generic Electronic Module (GEM) controls the operation of the 4x4 system

Vehicle Speed Sensor
The vehicle speed sensor (VSS), mounted in the rear of the transfer case, informs the GEM of the vehicle speed.

Transfer Case Shift Motor Sense Plates

The shift motor sense plate, an integral part of the electric shift motor, informs the GEM to the positions of the transfer case

Transmission Range Sensor
Located on the left side of the transmission, this sensor informs the GEM when the transmission is in the NEUTRAL position.

Electric Shift Motor
The electric shift motor, mounted externally at the rear of the transfer case, drives a rotary cam which moves the mode fork and range fork within the transfer case to select between the 2WD, 4WD HIGH, and 4WD LOW positions.

4x4/4x2 Vacuum Solenoids
These two solenoids are attached to the upper RH side of the engine compartment dash, and alternately route vacuum to the vacuum motor which engages/disengages the center axle disconnect collar in the front axle assembly.

4x4 Shift Motor Relay
A module containing two relays which under the control of the GEM, shift the transfer case shift motor between the 2WD, 4WD HIGH, and 4WD LOW modes.

Transfer Case Clutch Relay
An electromechanical relay is used to activate the transfer case clutch within the transfer case.

Good luck and hope this helps,but start with the simple and check the fuses and wire harness. Both white/light blue stripe wires should have 12V in run. The GEM will ground the left side (closest to engine) solenoid to disengage the front axle. It will ground the the right side solenoid (closest to fender) to engage the front axle. If the GEM doesn't see Neutral it will not let the truck come out of 4Lo. If the GEM had water leaking on it it may well be the root of the problem. The shift motor only has power when the GEM sends it a signal to move the shift lever. Once the shift is completed the motor shuts off. There are 2 wires that control the shift motor. A yellow and an orange. The GEM alternates between 12v and Ground to these wires to control which way the motor turns. The GEM uses the transfer case shift relay module to control the power to the motor. There are contact plates inside the shift motor assembly that indicate the position that the shift lever is in. This is what the GEM used to know what the T-case is doing. Any one of these components can fail.







Jan 10, 2010 | 2002 Ford Explorer

2 Answers

1998 f150 4x4 not working


Check BJB ( aka Battery Junction Box, Engine Compartment fuse panel ) Fuse #17. This is the power to the Transfer Case shift relay, which powers the Shift motor in the Transfer case and power to the magnetic clutch coil ( via the transfer case relay ).

The other fuse to check is the CJB ( aka Central Junction Box, cab fuse panel ) Fuse #23.

If both fuses check good, time to check for power on the connector for the shift relay and the shift motor. The power from BJB Fuse # 17 is the Dark Green w/ Light Green stripe ( this is hot at all times ).
The old school test is to lightly hit the back of the transfer case, to see if the shift motor is hung up.
Here are the diagrams, so you can see what I am talking about.
4068e7c.jpg
76ef260.jpg
1fec4e1.jpg

Dec 18, 2009 | 1998 Ford F150 Regular Cab

1 Answer

Code c140d and c140b truck won't shift into 4x4 intermittent. Service 4x4 light comes on.


Sounds like a bad transfer case motor, or sensor in the transfer case. Check wiring to the case and check for pinched/chafed/broken wires.

Jun 09, 2009 | 2007 Dodge Ram Truck

1 Answer

Denali slips in and out of 4x4


How may buttons for the 4X4 two , three , or four ? Do the lights flash ? Any messages - service four wheel drive system ? Which transfer case does it have ?

Transfer Case - NVG 246-NP8 (Two Speed Automatic)
The transfer case shift control module uses the VIN information for calculations that are required for the different calibrations used based on axle ratio, transmission, tire size, and engine. The system does not know which calibration to use without this information.
Transfer Case Encoder Motor
The transfer case encoder motor consists of a permanent magnet (PM) DC motor and gear reduction assembly. It is located on the left hand side (drivers side) of the transfer case. When activated it turns the sector shaft of the transfer case (clockwise or counter clockwise) to shift the transfer case. The encoder motor is controlled with a pulse width modulated (PWM) circuit within the transfer case shift control module. This circuit consists of a driver on both the Motor Feed A and Motor Feed B circuits. The encoder motor is bi-directional to allow the motor to shift the transfer case from 2HI or 4HI to NEUTRAL and 4LO positions.
Transfer Case Encoder
The encoder is mounted to the transfer case encoder motor assembly and is replaced as an assembly. The encoder converts the sector shaft position (representing a mode or range) into electrical signals inputs to the transfer case shift control module. The module can detect what position the transfer case is in by monitoring the 4 encoder channels (P, A, B, and C). These inputs translates into AUTO 4WD, 2H, 4H, NEUTRAL, and 4L or in transition between gears.
Transfer Case Motor Lock
The transfer case motor lock is used to provide a 2H, 4H, and 4L lock-up feature. When the lock circuit is energized, the transfer case encoder motor is allowed to turn. When the transfer case is placed 2H, 4H, or 4L the motor lock circuit has no power provided to it and the lock is applied. This assures that the transfer case remains in the current gear position. When AUTO 4WD is selected the motor lock remains applied until an adaptive mode (torque is applied to the front propshaft) is required. During an adaptive mode the motor lock circuit is energized and the motor lock is released, enabling the encoder motor to turn and apply torque to the front propshaft.


SERVICE indicator (4WD/AWD) Lamp
The SERVICE indicator (4WD/AWD) lamp is an integral part of the cluster and cannot be serviced separately. This lamp is used to inform the driver of the vehicle of malfunctions within the automatic transfer case (ATC) system. The SERVICE indicator (4WD/AWD) lamp is controlled by the transfer case shift control module via a Class 2 message or by a Sevice Indicator Control Circuit.

The first thing to do before assuming it's a loose wire would be to have it checked for codes , auto zone , advance etc... can not check this codes .
DTC B0768 Service Indicator Circuit High
DTC B2725 ATC Mode Switch Circuit Malfunction
DTC C0300 Rear Speed Sensor Malfunction
DTC C0305 Front Speed Sensor Malfunction
DTC C0308 Motor A/B Circuit Low
DTC C0309 Motor A/B Circuit High
DTC C0310 Motor A/B Circuit Open
DTC C0315 Motor Ground Circuit Open
DTC C0323 T-Case Lock Circuit Low
DTC C0324 T-Case Lock Circuit High
DTC C0327 Encoder Circuit Malfunction
DTC C0357 Park Switch Circuit High
DTC C0362 4LO Discrete Output Circuit High
DTC C0367 Front Axle Control Circuit High
DTC C0374 General System Malfunction
DTC C0376 Front/Rear Shaft Speed Mismatch
DTC C0387 Unable to Perform Shift
DTC C0550 ECU Malfunction
DTC C0611 VIN Information Error

If you know nothing about this , your best bet would be to take it to a qualified repair shop .

Apr 29, 2017 | 2000 GMC Denali

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

22486 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...