Question about Toyota Cars & Trucks

2 Answers

Trying to bleed the clutch on a 2012 toyota hiace and its not building up the pressure what are we doing wrong we did the clutch cylinder and now the slave cylinder but nothing works

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Dedicated:

    Visited the website for 20 consecutive days.

  • Expert
  • 356 Answers

Your not topping up with fliud full of air i had 4 mechanics do that years ago when i worked for toyota and the foreman asked me to look and see what they were doing wrong.I advised the 4 of them to go back to tafe .The one inside vehicle kept topping master cylinder up with plastic bottle handed to him From male who was bleeding all air out of system lol.

Posted on Dec 06, 2019

Ad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 3,515 Answers

Since there is very little fluid movement when you press in on the master cylinder and the fluid travels down, it can be very annoying to try to get a clutch system to bleed. The best luck I have ever had was to push in the clutch pedal with my right leg until it got tired and then switch to my left. When it was tired i'd switch back to my right. If you press the pedal all the way down about 100 times, it usually has enough pressure to operate.

Posted on Dec 06, 2019

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Anonymous

  • 50 Answers

SOURCE: 2001 ford ranger clutch

have you check the slave cylinder to see if its moving when someone puts there foot on the clutch.
And check the adjustment on the master cylinder.

Posted on Sep 18, 2008

Anonymous

  • 275 Answers

SOURCE: Bleeding clutch slave cylinder

if you loosten the slave bleeder screw and push in the clutch pedal fluid should come out if not make sure someone holds down the pedal and tighten the screw then pump the clutch a few times and hold the pedal and open the screw if no fluid repeat a couple of times if still no fluid you need either a new master cylinder or just rebuild it( normally cheaper) and if you rebuild it make sure you flush all the lines of debris

Posted on Nov 12, 2008

autodr

autodr

  • 260 Answers

SOURCE: Bleeding clutch slave cylinder

i think youre doing the right thing. they are very stubborn to bleed because the hyd. line goes up high across back of engine before droppiing back down to slave cyl., trapping air. could try to gravity bleed by opening bleeder at slave, cap off of master cyl, full with fluid then it may start to come out after a bit. then try your process again. or can try to bleed at connections further up the line, working your way back to bleeder. hope this helps. be patient.

Posted on Nov 15, 2008

Keith100881

Dennis Saunders

  • 74 Answers

SOURCE: put in new clutch and slave cylinder. no clutch pedal. how do you bleed the cylinder?

work it back and forth with your hand and you will get pedal after a while then bleed like you would brakes get help so one can pump and the other can bleed

Posted on May 24, 2009

Anonymous

  • 33 Answers

SOURCE: clutch pedal stays 2 the floor on a hydralic

Did you bleed the system? When you replace the the master and/or slave cylinder you have to bleed the system just as you would with brakes. There is a bleed screw on the slave cylinder. Open the bleed screw, have a helper depress and hold the clutch pedal down.Tighten the bleed screw, then release clutch. Repeat this procedure until you have removed all air from the system and the clutch pedal is firm. Keep an eye on the fluid level to avoid sucking air into the system. If you have done this, remember there is a possibility that the master or slave cylinder is defective.

Posted on Sep 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the clutch fluid located on Toyota hiace 1998 ?


Under the hood, on the firewall, there is the clutch master cylinder with a reservoir on it. This is where the fluid goes. Uses brake fluid, just like the brake master cylinder, also on the firewall. The clutch master only has one line coming from it-the line that goes to the clutch slave cylinder.

Aug 02, 2017 | Toyota Cars & Trucks

1 Answer

Wher can I find the clutch reservoir in a 1996 Toyota hiace 2.8D ?


if it is not on the master cylinder look for a hose that goes to the brake master cylinder reservoir as many vehicle now use a common reservoir
if not look fro a hose from the top of the clutch master cylinder and follow it till you get to the reservoir

Nov 15, 2015 | Toyota Cars & Trucks

1 Answer

Hard to press clucth /hiace 2014 .while to engage hard to press clutch


check the clutch operation if it is hydraulic--press the pedal and see if the slave cylinder movers the throw out arm
It suggests a problem with the clutch master cylinder or a failed hose in the system that blocks off when the pressure is applied
hard to select the gears indicates that the pressure plate is not releasing
if it is a cable operation then replace the cable assembly as it is jamming up inside.

Aug 09, 2015 | Cars & Trucks

1 Answer

Why my clutch cylinder lost its pressure when not in use for 12hours but once i adjust the piston of the clucth cylinder the pressure come back again


Hi this is a common problem with new or old hydraulic systems.If the hydraulic system has no leakages, no rubber reinforced hoses swelling under pressure. It will be correct to replace clutch master and slave cylinder .Do observe the condition of clutch and pressure plate, This seems to be a case of internal pressure loss .

Apr 05, 2015 | Cars & Trucks

1 Answer

2006 Toyota hiace diesel van clutch slipping. Are brake and clutch fluid the same? Cheers


Yes they are the same . Check that the master cylinder is operational as a slipping clutch can be a blocked compensating port not allowing the fluid to drain back to the reservoir and holding the pressure on the clutch release.

Oct 06, 2014 | 2007 Toyota Hi-Ace 220

1 Answer

Clucth slips every nw and again.ive replace clucth master and slave cylinder and the hoses for the clutch and still get them same problem.i can fix it for like a week each time by releasing the pressure...


the push rod for the clutch master cylinder has no free play,could be the master cylinder is too tight to the bulkhead and it should have a spacer in the form of a shim/gasket ,or the distance between the end of the push rod to the master cylinder is adjustable or the pedal mechanism is adjustable

Jun 28, 2011 | Hyundai Accent Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...