Optima Kia ignition switch how do you get it out 2015

SOURCE: 2004 Kia optima blower motor switch: How to replace??

how do you know the blower switch is bad?

Duane Wong

• 6826 Answers
• Posted on Jul 17, 2010

SOURCE: remove ignition switch for a 2004 kia optima

Ignition Switch Removal & Installation To Remove:

1. Disconnect battery negative cable.
2. Disarm air bag system.
3. Remove driver air bag module.
4. Loosen screw and lift horn pad to remove.
5. Remove lock nut and washer. CAUTION
   Do not hammer on steering wheel. Damage can occur to the energy absorbing portion of the steering column.
   
6. Pull dynamic damper forward and lift up to remove.
7. Remove steering wheel.
8. Remove steering column shrouds.
9. Remove lower cover.
10. Remove multifunction switch.
11. Remove entire lower portion of dash.
12. Remove mounting fasteners and lower steering column.
13. Remove bolts and separate ignition switch from steering column.

1. Install ignition switch to steering column and install bolts.
2. Raise steering column and install mounting fasteners.
3. Install lower portion of dash.
4. Install multifunction switch.
5. Install lower cover.
6. Install steering column shrouds.
7. Install steering wheel.
8. Install dynamic damper.
9. Install washer and lock nut.
10. Lift horn pad and install screw.
11. Install driver air bag module.
12. Connect battery negative cable.

SOURCE: Ignition failure sensor

there is such a part on the 2006 Optima...it is located under the plastic cover on the upper right side of the motor

SOURCE: I have a 2015 kia optima. Thumping noise in rear when going forward. Louder when going slow. Just inspected last week. Help.

It's a new car - don't sweat it - just take it back to the dealer for warranty repairs.

SOURCE: I changed my car battery in my 2015 Kia Optima lx gdi and my radio will not turn on

tyou have activated the r theft code for the radio when you disconnected the battery
get that code and install it and it will work