I got CD Error showing everyting I'm trying to use CD Player, Can't load or eject cd. I removed fuses and put them back, cd player initialized but didn't solve the problem. What else can be done???
Turn key switch on and off, Remove Fuse's 7 and 31, turn Key on and off , Then put back the fuse's and it should work again!
Is there a CD stuck in the unit? If there is there should be a small hole where you can insert a paper clip to push the mechanism to eject the CD
I believe the problem is w small plastic gear has come off a shaft in the eject/load mechanism. It can be put back on and glued and the cd unit should start working. The trick of pulling fuses and putting them back causes the unit to re-initialize after that gear has slipped some on the shaft, but not come all the way off of shaft yet. Pulling fuses will not do any good after the gear has come off the shaft. If you are handy, you can fix this yourself. If not take to a shop.or a Honey-Do.( Honey , do this, honey do.that....m). You will need to pull the cd/radio unit out and open and take Sparta till you find both the loose gear and the shaft it came off of. Glue it on and reassembled. I hope this helps and clear any confusion about why everyone is saying pull fuses and it not helping.
4,691 views
Usually answered in minutes!
Where exactly is that hole? I have 6 cd inside, and I was switching from one to another and it stoped working and cd error displayed.
×