94 Park Avenue trunk don't open with button inside

6ya staff

• 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

SOURCE: trunk lide wont open

Try to apply pressure from the top of the trunk and push short burst while using the key, If this doese not work you can try to enter from the rear seat taking out the bolts for the rear back rest.

Posted on Jan 23, 2009

Greg Bernett

• 2989 Answers

SOURCE: license plate bulbs on 98 Park Avenue

License Plate Lights Removal & Installation 1997 – 2000 To Remove:

License/backup Lamp Assembly

1. Remove the rear compartment lid trim. (if necessary)
2. Disconnect the license/backup assembly connector from the body harness.
3. While removing the license/backup lamp assembly from the rear compartment lid, disconnect the harness grommet from the rear compartment lid.
4. Remove the license lamp housing from the license/backup lamp assembly.
5. Remove the license lamp bulb from the housing and socket.

1. Install the license lamp bulb into the socket and housing.
2. Install the license lamp housing onto the license/backup lamp assembly
   • Torque the fastener to 18 in-lb (2 Nm).
3. While holding the license/backup lamp assembly, install the harness grommet to the rear compartment lid.
4. Install the license/backup lamp assembly
   • Torque the fasteners to 53 in-lb (6 Nm).
5. Connect the license/backup assembly connector to the body harness.
6. Install the rear compartment lid trim. (if necessary)

Posted on Jun 30, 2009

SOURCE: 2000 Intrepid Trunk Lock

All newer vehicles have an emergency manual trunk release inside the trunk.

This should be basically a rip cord directly attached to the trunk locking mechanism. Most modern ones have a yellow handle on the ceiling of the trunk that will release the trunk latch if it is pulled. Yours may be a different color, but if you get in there with a flash light you can probably trace a steel wire from the trunk latch back to some sort of handle that looks like you can pull it. Its definitely worth a shot.

Posted on Aug 07, 2009

SOURCE: How do I bypass 1992-94 buick park avenue security system?

On mine I bypassed it with this solution after it was locked down for weeks: http://newrockies.ca/vatsbypass . This one will bypass the entire system and not only the key and lock cylinder. I wanted to kick the whole system out of my car and never hear about it anymore.

Posted on Feb 10, 2010

SOURCE: 93 buick park avenue. Elec. trunk pull down

Thats a pretty common problem with those motors so I would lean towards it being just that. I dont know if you are into shoppin around for it but I happen to see a couple on Ebay Motors for about 48.00 bucks.

Posted on Feb 17, 2010