SOURCE: torque specs 7.5 inch rear axle 96 ford ranger
Differential bearing caps 70-85 ft lb
Ring gear bolts 70-85 ft lb
Pinion bearing preload if using original bearings 8-14 lb-in, if installing new bearings 16-28 lb-in
SOURCE: Front Hub Bearing Torque specs to complete replacement
THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS
SOURCE: cv axle removal from transmission
take a pry bar to the side of the tranny and pry the cv out, there is a clip on the shaft of the axle on the inside of the tranny
SOURCE: torque specs on replacing cv axle on 05 Pacifica
ok here we go tie rod=55 ft lbs axel nut= 180 ft lbs strut bolts= 65 ft lbs plus 90 degrees
Testimonial: "thank you very much!!!!!!!!!!"
418 views
Usually answered in minutes!
×