U need to bleed the system it has air in it.
The service and repair manual with diagram will provide you step by step help to locate and fix the problem easily and you will get the manual from the given link https://toolsnyou.com/
SOURCE: hyundai getz
if the speedo still works then it will need a spedo unit if the speedo doesn't work it is either the cable or the gear in the trans to check the cable unthread from trans and attach a drill to the cable innereds spin the drill if the speedo does not move replace the speedo cable
SOURCE: Fuse problem in hyundai getz
dear friend -the fuses you describe is cluster fuses and has nothing stopping or starting of the engine.they are joint in a yellow holder.i think you might have a short be hind the fuse box,thats wh you keek on blowing that fuse.
SOURCE: where is the computer box of the 2006 hyundai
If it's anything like the Tiburon, there are two different locations, depending on which engine you have. The 2.0 liter 4 cylinder computer is located under the dash, driver's side, near the steering column shaft...
On the 2.7 V6, it's located on the passenger side, front A pillar near the glove box..
SOURCE: hyundai tucson 2 liter crdi gear box sound its a
Hi there, the Common Rail Diesel Inyection (CRDI) 2000 cc 112 Hp M/T have a big trouble on cluth plate, and sounds very loud between 1500 and 2000 rpm on 2,3,4 shift.That motor has too much torque and cause excesive wear in the cluth roll and plate so starts roominess in the cluth system. You could change those parts but quickly the sounds come again. Hyundai is the resposable of that damage. I hope in the near future recall the CRDI model 112 Hp and replace the cluth.
SOURCE: Huyundai Getz 2005 1.5 crdi
maybe a faulty battery or poles dirty not allowing contact with fitted battery
would try another battery in it
82 views
Usually answered in minutes!
×