Cars & Trucks Logo

Related Topics:

s
simon graham Posted on Nov 03, 2019

Location of engine coolant temperature sensor on citreon c4 Picasso 1.6 vtr+

1 Answer

Ezekiel Manuel

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that hasĀ over 10 points.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 9 Answers
  • Posted on Dec 19, 2019
Ezekiel Manuel
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that hasĀ over 10 points.

Problem Solver:

An expert who has answered 5 questions.

Joined: Dec 19, 2019
Answers
9
Questions
0
Helped
3227
Points
17

5 Related Answers

Anonymous

  • 2 Answers
  • Posted on Jul 09, 2008

SOURCE: 99 cadillac de ville

the coolant temp sensor is at the rear of the engine and is a "bad word" to get to. the 3 relays are at the bottom,under the fans. if you remove the driver side fan out of the way( 2 10mm bolts holding the fan) you should have good access to them. they do have locks on them and may be tricky to unplug. there is a 7/16 nut holding the relay plate down. remove and it should be easy to remove them.

Ad

Anonymous

  • 962 Answers
  • Posted on Nov 24, 2008

SOURCE: Location of coolant temperature sensor

Maybe this will help . although this is from a 1997 Caddy.


Cadillac DeVille Engine Coolant Temperature (ECT) Sensor Location62451583.gif

Anonymous

  • 2559 Answers
  • Posted on Jan 08, 2009

SOURCE: locate engine temperature coolant sensor on jetta TDI 2004

This is it.8c0bf30.jpg

Anonymous

  • 253 Answers
  • Posted on May 19, 2009

SOURCE: location of engine coolant temperature sensor on

It is a 2 wire seneor under the throttle body. You will have to remove the air breather and it will be a brass/black plastic sensor. A 3/4 socket will fit it.Good Luck

Anonymous

  • 119 Answers
  • Posted on Jul 14, 2009

SOURCE: replacement of coolant temperature sensor

located under intake in water crossover pipe,you can access the sensor by removing intake chamber box,then pcv hose connected to the block,the connector is orangeish 2pin,use a 19mmdeep socket on a 3/8 ratchet to get it loose,make sure engine is cool,also make sure there is a new brass washer with your new sensor,sometimes the old washer comes off when removing the sensor,sometimes it sticks to the pipe,some coolant will escape so make sure to top it off

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2006 Citroen Picasso Diesel. Error code P1152. What does it mean please?

Question edited for clarity.
Question moved to model category.
Duplicate question deleted. Refresh page to see your question.

Citroen C4 P1152 Engine Trouble Code

EngineTroubleCode.com http://p1152.enginetroublecode.com > citroen-c4
The reason of P1152 OBD-II Engine Trouble Code is Fuel Rail/System Pressure - Too High. Parts or components should not be replaced with reference to only a ...

Missing: Diesel. ā€Ž' Show results with: Diesel.

P1152 DTC For Citroen C4 Picasso Ii

EngineDTC.com http://enginedtc.com > p1152-citroen-c4-picasso-ii
Your Citroen C4 Picasso Ii engine control system detects a problem, the computer stores the diagnostic trouble code P1152 in its memory.
0helpful
1answer

Citroen c4 grand Picasso 2010 sidelight bulb fuse location.

F12 possibly?

Fuse Box Diagram Citro?n C4 Picasso I (2006-2012)

fuse-box.info > citroen > citroen-c4-picasso-i-2006-201...
2008, 2009, 2010, 2011, 2012 - Cigar lighter (power outlet) fuses in the Citroen C4 Picasso I are the fuse F9 (Cigar lighter, front 12V socket) in the ...
0helpful
2answers

Where is the engine coolant temperature sensor low input located on a kia 2007 spectra

Not low input sensor...P0117 KIA - Engine Coolant Temperature Sensor 1 Circuit Low Input

Possible causes
Low engine coolant level
Faulty Engine Coolant Temperature (ECT) sensor
Faulty engine coolant thermostat
Engine Coolant Temperature (ECT) sensor harness is open or shorted
Engine Coolant Temperature (ECT) sensor circuit poor electrical connection

Just replace coolant temperature sending unit....
11_14_2017_9_19_36_pm.jpeg
1helpful
1answer

How do I replace a temperature switch. Where do I find the switch. Do the c4's have different types of temp switches.

the coolant temperature sensor is fitted in the thermostat housing which is bolted to the side of the cylinder head (gearbox side), to locate it follow the top radiator hose, if i remember correctly the sensor has a green connector
0helpful
1answer

How to remove plastic covers over brake lights citroen c4 grand picasso vtr

They're glued together, you would have to break them to get them off.
0helpful
1answer

How to fit rear brake pads on c4 picasso citreon

undo the tyres
take the caliper off
need to rewind the piston on caliper back.
need a tool to rewind back the piston
change pads and refit
0helpful
1answer

Citreon c4 model vtr year 2006. no main lights but i can get full beam

Try your dimmer switch, when they go bad we either have bright or dim.
4helpful
1answer

Location of engine coolant temperature sensor

Automobiles: 2000 Ford Escort ZX2 4-cylinder 2.0L MFI DOHC

NOTE
The "left" side of the engine is the driver's side.

The Engine Coolant Temperature (ECT) sensor is a thermistor (a device which changes resistance or voltage as temperature changes). The sensor detects the temperature of engine coolant and provides a corresponding signal to the PCM (Powertrain Control Module - aka "the car's computer").

The ECT sensor is mounted in the following locations (small Ford engines):

1.8L engines: in the cylinder head
1.9L engines: threaded into the heater hose inlet pipe
2.0L engines: at the left rear of the engine

2.0L Zetec Engine

(1) Partially drain the engine cooling system using a clean container. If coolant is in good condition, retain for reuse.
(2) Disconnect the battery ground cable.
(3) Disconnect the electrical wiring connector from the engine coolant temperature (ECT) sensor.
(4) Remove the retaining clip and the ECT sensor.


12_5_2011_5_38_05_pm.jpg

Fig. 1 Escort ZX2 ECT sensor - The retaining clip is removed (at the solid arrow). Withdraw ECT sensor by gently wiggling/pulling in the direction of the dashed arrow.

To install:

NOTE
Coat the ECT sensor O-ring with clean coolant prior to installation.

(1) Replace the retaining clip and the ECT sensor.
(2) Connect the electrical wiring connector from the Engine Coolant Temperature (ECT) sensor.
(3) Connect the battery ground cable.
(4) Refill the engine cooling system. An inexpensive plastic "Radiator Funnel" will help with this task.
3helpful
1answer

Where is the tempurture cooling sensor located on a 1994 buick regal

The coolant temperature sensor is a thermistor mounted in the engine coolant stream. A thermistor is an electrical device that varies its resistance in relation to changes in temperature.

For 2.5L engines, the coolant temperature sensor is located on the left side of the cylinder head.

For MFI engines, the coolant temperature sensor is located on the intake manifold water jacket or near (or on) the thermostat housing.

zjlimited_2011.jpg

Fig. 1: Engine Coolant Temperature (ECT) sensor and connector


zjlimited_772.gif

Fig.: Engine Coolant Temperature (ECT) sensor location-3.1L (VIN T) engine shown

Hope this helps (remember to rating this and leave an testimonial comment about this free answer).
Not finding what you are looking for?

1,942 views

Ask a Question

Usually answered in minutes!

Top Citroen Experts

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

 Mikey
Mikey

Level 3 Expert

6904 Answers

Jonathan Buck
Jonathan Buck

Level 3 Expert

446 Answers

Are you a Citroen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...