SOURCE: crankshaft position sensor replaced and car shuts off
Hello, The crankshaft sensor is located at the left rear of the motor, behind the left cylinder head where the transmission bolts up. I believe that it has a 6mm allen head screw holding it down.
I hope this helps.
CYA, Gator241
SOURCE: Replace Cabin Filter in my 2002 C240 Mercedes Benz
I have a 2002 C240 Mercedes and need to replace the cabin air filter. Problem, I don't know were it is located or how to replace it. Can you help me.
hello,be sure your starter motor is working,fly wheel gear(for starter bendix drive)should also check,valve clearance also,try to rotate your engine with socket 27mm,(manually) maybe your piston is stuck-up,ty
SOURCE: 2004 Kia Optima no start after timing belt, crank, cam sensor replacement
did you use aftermarket crank sensor? if so that might be your problem. dealer has several different ones, by providing vin number, but there is only one after market for all optimas 01-05. try to connect thick pink wire and thick orange wire together on the ignition failure sensor. you might have the same problem as me. good luck.
For no spark problem,click the link below :---Car has
no spark?
http://schematicsdiagram.blogspot.com/2011/06/car-has-no-spark.html
53 views
Usually answered in minutes!
×