I have a 2003 I35 Infiniti and the codes are bad are p0430 and p1574 what does that mean

SOURCE: How to program 2002 i35 infiniti keyless remote?

The procedure goes like this. First get in the car and lock all the doors. Secondly insert and remove the key repeatedly until the turn signal indicators on the dash flash twice simultaneously, it should be like seven or eight times. Then turn the key on and press the lock button on the remote and the lights should flash again. After that turn the key off and manually unlock and open the drivers door, then shut it. Wait a few seconds then try the remote. 

SOURCE: how do you get at the radiator drain plug on a

Hi...

This picture should help you.


Thanks
Smith

SOURCE: My infiniti I35 stopped beeping when i lock the

Probably a setting with the remote. Check your owners manual , but it is likely that you press and hold both the "lock" and "unlock" button at the same time. Hold for 3-5 seconds and you should hear a beep confirming the sound change. You can repeat if you like the silent option better.

SOURCE: how do i replace the camshaft position sensor on a

hi, i have infinity fx 35 2003 it light on the service engine camshaft position sensor bank 1 , i replaced the bank 1 after 3 hour it light on again service engine + VDC off and slip i put the scanner it told me camshaft position sensor bank 1 again what can i do ?

Arnie Burke

• 7339 Answers
• Posted on Jun 09, 2011

SOURCE: My 2003 Infiniti I35 has

340 is camshaft sensor issue and 447 is evaporative emmisions--dont just replace parts cause it can mean other things--get car scanned with a tech ll that runs a data stream to pinpoint--have u donr regular tuneup and inspection on motor