Question about AC Cars & Trucks
If your compressor is "locked up" there is no way to mechanically free it. The compressor will have to be replaced, a vacuum pulled on the system and new refrigerant put in the system. This is beyond the scope of the average do-it-yourselfer. I recommend taking it to a shop that does AC repair work.
Posted on Oct 18, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
With the key in position 1, hit the odometer reset button on the left on the cluster 3 times in a row. The cluster should beep once. scroll through the multifunction display with the page buttons until the display shows the onboard voltage screen. It will say something like "UB: 12.2 V" scroll threw this menu with with the up/down until you reach the "service menu" page. scroll down to "confirmation" press +, confirm full service with +. Wait till it says service confirmed. cycle the key off and then back on to position 2. Scroll to the normal service menu where it normally says how many days or miles till next service. If the service was reset correctly, it will say "service display not possible" for a few minutes while it recalculates. You must cycle the key off and back on before it will back out of the onboard diagnostic mode. If you dont back out, the esp/abs/bas lights will illuminate when the car is started
Posted on Apr 13, 2009
depending on the pollution in your area. two to three thousand oh yeah keep in mind synthetic oil is far superior, to non synthetic.
so pic a good oil.
Posted on Apr 16, 2009
SOURCE: AC low pressure port location
hello,good day,you have a 210 model with v 8 engine,your high pressure connection is located at front of your condenser,beside your ax.fan,then your low pressure connection is located at engine walling near your vacuum hose for brake booster,right side ,standing in front,ty
Posted on May 13, 2009
the blower motor for the a/c is located under the windshield wiper motor. you access it from the engine compartment by removing all the trim covers under the windshield, also have to remove the wiper motor and assembly but be careful not to crack the windshield. once you pull all the covers out of the way you will see the blower motor housing. remove clips and voltage regulator in order to remove top cover of blower motor housing.
Posted on Oct 03, 2010
SOURCE: where is the low pressure
open engine hood its at the right front on the ac condenser it's covered by black plastic flap open the little flap you can see the low pressure valve in it.
Posted on Oct 12, 2010
Tips for a great answer:
Sep 18, 2018 | Mercedes-Benz E-Class Cars & Trucks
Aug 26, 2014 | Mercedes-Benz E350 Cars & Trucks
May 01, 2012 | 2007 Mercedes-Benz E350 4Matic Wagon
Nov 04, 2011 | 2007 Mercedes-Benz E350 4Matic Wagon
May 27, 2010 | 2003 Mercedes-Benz E-Class
Nov 22, 2009 | 2007 Mercedes-Benz E350 4Matic Wagon
Oct 22, 2009 | 2006 Mercedes-Benz E-Class
Apr 16, 2009 | Mercedes-Benz E350 Cars & Trucks
Dec 29, 2019 | AC Cars & Trucks
May 27, 2019 | AC Cars & Trucks
16 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: