Code 0740 was diagnosed when engine light came on. After a while engine light went off while driving. Is this converter clutch solenoid sensor problem or something more serious. Tune up 40k now 77k

2013 Chrysler Dodge Caravan SE

1 Answer

paul wright

Contributor 14 Answers
Posted on Nov 09, 2019

paul wright

Contributor

Joined: Feb 16, 2009

Answers

Questions

Helped

2380

Points

If you look up the engine code on "Yahoo" C - 740 means you have a problem with the "Torque Convertor", or sensor. Dodge transmissions are known for this.

5 Related Answers

Anonymous

132 Answers
Posted on Jan 30, 2009

SOURCE: Locationof the Torque Converter Clutch Solenoid

Your transmission should still work if the solenoid goes bad. It will just shift funny

Anonymous

115 Answers
Posted on Jun 26, 2009

SOURCE: Check Engine Light code on dodge caravan ec P1495

the leak detection pump pressurizes the evaporative system to check for leaks. the computer has detected there is a fault somewhere in the cicuit (wiring) that operates the pump.

Anonymous

7 Answers
Posted on Aug 16, 2009

SOURCE: 2005 dodge caravan engine light code p 441

If you mean code P0441 - This Relates to Incorrect Purge Flow for Evaporative Emission System

Anonymous

3092 Answers
Posted on Dec 28, 2009

SOURCE: P2097 Error code in 2006 Dodge Grand Caravan, which O2 Sensor?

The one before the catalytic, on the side where cylinder # 1 is at. close to the exhaust mag.

Robert Debison

412 Answers
Posted on Dec 30, 2009

SOURCE: trouble with the transmission solenoid

USUALLY A SHIFT SOLENOID DTC IS REPAIRED BY REPLACING THE TRANS SOLENOID PACK ASSEMBLY..LOCATED ON OUTSIDE OF TRANSMISSION..YOU MUST BE CAREFUL WHEN CHANGING PACK..CLEAN ALL DIRT/DEBRIS FROM OUTSIDE OF PACK..YOU DON'T WANT ANY DIRT TO ENTER TRANSMISSION..SOLENOID IS A SMALL BOX LOCATED ON SIDE OF TRANS FACING FRONT OF VEHICLE..YOU MUST REMOVE TRANS COOLER LINE HOSES FROM FITTINGS ON TRANS..REMOVE INPUT SPEED SENSOR..UNPLUG PACK..8MM SCREW HOLDS IT..3 BOLTS HOLD PACK TO TRANS..YOU MUST CLEAN ALL GASKET RESIDUE THOROUGHLY BEFORE INSTALLING PACK..I'D RECOMMEND GETTING SOMEONE WHO HAS DONE THIS BEFORE IF YOU ARE NOT COMFORTABLE DOING THIS..I HOPE THIS HELPS

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

2answers

Codes po700, po 740, po430 code comes up on my 2005 dodge durango. it starts, runs, rides, drives great . but my check engine light is on. what do i need to check for??

P0700 OBD II Trouble Code Transmission Control System Malfunction...
P0740 Dodge Torque Converter Clutch Circuit
P0430 Dodge Catalyst Efficiency Bank 2

Read full answer

Jun 16, 2018 • Dodge Cars & Trucks

0helpful

1answer

Had 3 codes pop up for a 2008 nissan altima 2.5s

Fault codes rarely cause any drivability related symptoms.
P0740 NISSAN - Torque Converter Clutch Solenoid Circuit Fault
Possible causes

Low transmission fluid level
Dirty transmission fluid
Faulty torque converter clutch solenoid valve
Torque converter clutch solenoid valve harness is open or shorted
Torque converter clutch solenoid valve circuit poor electrical connection

P0826 means there is an issue with a circuit for the up and down switch, usually due to a disabled manual shifter or TCM placed in Limo-in mode.
The presence of a stored code P0725 means that the powertrain control module (PCM) has detected a circuit malfunction with the engine speed sensor input signal. The engine speed input sensor is sometimes called the transmission input speed sensor and the input speed sensor. This type of code may be caused by a mechanical problem or an electrical problem

Read full answer

Mar 30, 2018 • Nissan Cars & Trucks

1helpful

1answer

I have 2002 VOLVO S60 non turbo code p0740 poped I replaced the cluch solenoid and oil after 5 miles the same problem any sugestion will help

code p 0740 refers to torque converter clutch (TCC) solenoid ---circuit malfunction=== causes ---wiring---TCC solenoid--ECM---TCM ( transmission control module)
check the wiring and connections for clean / tight connections have the TCM tested or replaced
take it to an accredited auto transmission specialist shop to check the solenoid operation and test of the TCM or for a proper diagnosis of the problem

Read full answer

Nov 25, 2016 • Volvo Cars & Trucks

2helpful

1answer

Code 0740 andd 0700

P0740 - Torque Converter Clutch Malfunction

http://engine-codes.com/p0740.htmlForum CodePossible causes- Low transmission fluid level
- Dirty transmission fluid
- Faulty torque converter clutch solenoid valve
- Torque converter clutch solenoid valve harness or connectors
- Torque converter clutch solenoid valve circuit is open or shorted When is the code detected?Diagnostic trouble code P0740 is detected when TCM detects an improper voltage drop when it tries to operate the solenoid valve.

P0700 TCM has requested PCM to run on Check engine light to alert to a fault in the automatic transmission.

Read full answer

Oct 02, 2012 • 2003 Volvo V70

0answers

Get rid of the check engine light on code po740

Read full answer

Be the first to answer Aug 07, 2011 • 2001 Dodge Caravan

5helpful

2answers

I got an engine light code po 742 what does that mean?

The code means that the Torque Converter Clutch (TCC) in your transmission is staying engaged after the computer has commanded it off. This could be caused by a sticking TCC Solenoid, By internal hydraulic pressure leakage, by a faulty Turbine Speed Sensor Circuit, or a faulty Powertrain Control Module.

If your engine has been stalling when you come to a stop - especially after getting off of the highway, then you probably have a sticking TCC Solenoid.

This really needs to be diagnosed properly to keep from spending a bunch of money on parts unneccessariily.

Read full answer

Feb 25, 2011 • 1999 Saturn SL

0helpful

1answer

TCC SOLENIOD FAILDED VAlVE / code 0740/ open or short circult

That's your torque converter clutch solenoid, Looks like need replace and if not, You transmission will not survive for long because it needs that Solenoid. Not hard to change and you might need to take the valve body cover to access to the part. Good luck

Read full answer

Dec 25, 2010 • 1997 Mazda MPV

2helpful

1answer

Chev blazer 2000 apply brakes engine dies the ob2 code is 0740

P0740 - Torque Converter Clutch Solenoid Circuit

Read full answer

Sep 15, 2010 • Chevrolet Blazer Cars & Trucks

0helpful

1answer

I have 97 Acura RL 3.5/V6, got 'Check Engine Light' on (OBD Code P0740) about a year, my car is running OK, except slightly low fuel economy (19 Miles/Gallon). My questions are: 1)Could it be just Solenoid...

it will be a solenoid
the code p 0740 refers to torque converter clutch (TCC) solenoid ---circuit malfunction===causes --wiring--TCC-- ECM /? TCM ( transmission control module
it is not a transmission problem so leave it alone
it is an electronic control problem so check wiring and connections and if it is either the solenoid or the TCM replace what is faulty
take it to an accredited auto transmission specialist shop have an tranny oil change done , have the bands and clutch pack s adjusted and have them check the TCC solenoid and TCM for correct operation
probably find that there will be an improvement in the fuel consumption after that

Read full answer

Jun 06, 2017 • 1997 Acura RL

0helpful

2answers

P 0740 code

Hi
The p0305 code is cylinder 5 misfire.
The p0740 code is torque converter clutch solenoid circuit.

Read full answer

Mar 30, 2009 • 2000 Dodge Caravan

Not finding what you are looking for?

View Most Popular

Cars & Trucks

Codes po700, po 740, po430 code comes up on my 2005 dodge durango. it starts, runs, rides, drives great . but my check engine light is on. what do i need to check for??

Dodge Cars & Trucks

141 views

Ask a Question

Usually answered in minutes!

Related Topics:

Code 0740 was diagnosed when engine light came on. After a while engine light went off while driving. Is this converter clutch solenoid sensor problem or something more serious. Tune up 40k now 77k

1 Answer

paul wright

5 Related Answers

Anonymous

Anonymous

Anonymous

Anonymous

Robert Debison

Add Your Answer

Attachments: Added items

Related Questions:

Codes po700, po 740, po430 code comes up on my 2005 dodge durango. it starts, runs, rides, drives great . but my check engine light is on. what do i need to check for??

Had 3 codes pop up for a 2008 nissan altima 2.5s

I have 2002 VOLVO S60 non turbo code p0740 poped I replaced the cluch solenoid and oil after 5 miles the same problem any sugestion will help

Code 0740 andd 0700

Get rid of the check engine light on code po740

I got an engine light code po 742 what does that mean?

TCC SOLENIOD FAILDED VAlVE / code 0740/ open or short circult

Chev blazer 2000 apply brakes engine dies the ob2 code is 0740

I have 97 Acura RL 3.5/V6, got 'Check Engine Light' on (OBD Code P0740) about a year, my car is running OK, except slightly low fuel economy (19 Miles/Gallon). My questions are: 1)Could it be just Solenoid...

P 0740 code

Not finding what you are looking for?

Cars & Trucks

Codes po700, po 740, po430 code comes up on my 2005 dodge durango. it starts, runs, rides, drives great . but my check engine light is on. what do i need to check for??

Ask a Question

Check Out the Latest Top Trucks Report!

Top Dodge Experts

ZJ Limited

Thomas Perkins

Arnie Burke

Are you a Dodge Expert? Answer questions, earn points and help others

Manuals & User Guides

2011-dodge-journey-31045.pdf....

Journey2009.pdf. user-manual-2010...

Journey2009.pdf. user-manual-2010...

Related Topics:

Code 0740 was diagnosed when engine light came on. After a while engine light went off while driving. Is this converter clutch solenoid sensor problem or something more serious. Tune up 40k now 77k

1 Answer

paul wright

5 Related Answers

Anonymous

Anonymous

Anonymous

Anonymous

Robert Debison

Add Your Answer

Attachments: Added items

Related Questions:

Codes po700, po 740, po430 code comes up on my 2005 dodge durango. it starts, runs, rides, drives great . but my check engine light is on. what do i need to check for??

Had 3 codes pop up for a 2008 nissan altima 2.5s

I have 2002 VOLVO S60 non turbo code p0740 poped I replaced the cluch solenoid and oil after 5 miles the same problem any sugestion will help

Code 0740 andd 0700

Get rid of the check engine light on code po740

I got an engine light code po 742 what does that mean?

TCC SOLENIOD FAILDED VAlVE / code 0740/ open or short circult

Chev blazer 2000 apply brakes engine dies the ob2 code is 0740

I have 97 Acura RL 3.5/V6, got 'Check Engine Light' on (OBD Code P0740) about a year, my car is running OK, except slightly low fuel economy (19 Miles/Gallon). My questions are: 1)Could it be just Solenoid...

P 0740 code

Not finding what you are looking for?

Cars & Trucks

Codes po700, po 740, po430 code comes up on my 2005 dodge durango. it starts, runs, rides, drives great . but my check engine light is on. what do i need to check for??

Ask a Question

Popular Questions

2.4 Dodge avenger belt Diagram

Vacuum hose diagram.dodge ram,1500,4x4,5.2l

Engine code $7E8: engine

Diagram firing order 5.9 dodge

1996 Dodge Ram Transmission shifting problem

Check Out the Latest Top Trucks Report!

Top Dodge Experts

ZJ Limited

Thomas Perkins

Arnie Burke

Are you a Dodge Expert? Answer questions, earn points and help others

Manuals & User Guides

2011-dodge-journey-31045.pdf....

Journey2009.pdf. user-manual-2010...

Journey2009.pdf. user-manual-2010...