Question about Hyundai Cars & Trucks

Open Question

Degrees on torque setting on hyundai i20 head

Posted by on

Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 280 Answers

SOURCE: I need the cylinder head torque settings for 1997

1998 Hyundai Lantra "G4GM" engine 1795cc.there are two heads or blocks, one is called the M10, other is the M12, figure out which one you have cause the torque is different for stage one by 5nm........... Dont get confused theres 2 different engines so 2 different torques for stage1---------
heres the full details: Stage 1 - m10 = 30nm / m12 = 35nm-------------------------- -------- Stage 2 - tighten by 60-65 degrees ------------ stage 3 - tighten by 60-65 degrees. no sequence is given in the data book for tightening so go off what you thinks right, it doesn't matter on this engine.

Posted on Jan 26, 2010

Testimonial: "Very accurate answer. Thanks, all is well now"

Ad
johnjnail

john nail

  • 1702 Answers

SOURCE: torque settings for a hyundai accent 1500 1998

cylinder head bolt torque

52-55 ft lbs. cold engine
59-63 ft lbs. hot engine

connecting rod cap nut 26-28 ft lbs. SOHC
connecting rod cap nut 23-26 ft lbs. DOHC

main caps 41-44 ft lbs.

Posted on May 25, 2011

Bill Boyd

  • 53757 Answers

SOURCE: I need the cylinder head torque settings for 2009 hyundai i20 which seems to be a national security secret-can anyone help?

go google and type in - torque specifications for head bolts for hyundai i20 engine 2009 model --and the specifications will be there
it is no secret but you will not get them as a ft/lb setting as that is the most unreliable way of setting modern engines
what you will get is 30 ft/lbs initial the a number of degrees turn then another lot of degrees turn
you will require a degree meter available from most good auto spares shops

Posted on Jan 31, 2016

magna buff

  • 3828 Answers

SOURCE: torque settings head bolt hyundai 2.2 crdi 2006

is your motors head torques listed on

also has torque sequence page number reference layouts are bottom of the document

page 33 as a pdf

or page 50 of paper listings

http://olybrake.com/pdf/fel_pro_torque_specs_guide.pdf

Posted on May 11, 2016

Testimonial: "nothing of 2.2crdi D4EB ENGINE"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Please confirm torque for 95 accent 1.5 head bolts.Thanks


Already answered on Fixya

According to my haynes manual for G-S reg, 1989-1998 it goes as follows,
Stage 1:- Tighten all bolts by hand until bolt heads just contact cyl. head.
Stage 2:-Tighten all bolts to 40Nm or 30lb ft.
Stage 3:-Angle tighten all bolts a further 60 degrees.
Stage 4:-Angle tighten all bolts again a further 60 degrees.
Stage 5:- M12 x 140mm bolts ONLY angle tighten a further 20 degrees.

Cylinder head torque settings for 1995 hyundai accent 1 5

Feb 02, 2017 | Hyundai Accent Cars & Trucks

1 Answer

What are the torque settings for a hyundai get 1.3 - cylinder head


you do not need to renew bolts but good practice to do so. stage 1. 23-27 nm stage 2 plus 60-62 degrees stage 3 60-62 degrees use angle gauge on your strong arm/torque wrench

Jan 28, 2017 | Hyundai Cars & Trucks

1 Answer

I need the cylinder head torque settings for 2009 hyundai i20 which seems to be a national security secret-can anyone help?


go google and type in - torque specifications for head bolts for hyundai i20 engine 2009 model --and the specifications will be there
it is no secret but you will not get them as a ft/lb setting as that is the most unreliable way of setting modern engines
what you will get is 30 ft/lbs initial the a number of degrees turn then another lot of degrees turn
you will require a degree meter available from most good auto spares shops

Jan 31, 2016 | Hyundai Cars & Trucks

1 Answer

Torque specifications


Head bolts are torqued in 3 steps, 1-18ft.lbs, 2-60 degrees, 3-60 degrees, camshaft caps-10-11 ftlbs, intake manifold-12-17ftlbs, exh manifolds-32-40 ftlbs, camshaft pulley-74-89 ftlbs.

Feb 05, 2014 | Cars & Trucks

1 Answer

Passenger door on hyundai i20 won't open


Get this manual online at www.reliable-store.com and get complete guide on whether to repair or not, service it, and how to repair etc, along
with wiring diagrams, electrical diagrams, torque specs, error codes, everything.

Jan 02, 2014 | 2010 Hyundai i20 1.2i

1 Answer

Big ends torque settings head torque settings


10 mm bolts

step 1 22 ft lbs.
step 2 60 degrees
step 3 additional 60 degrees

12 mm bolts

step 1 26 ft lbs
step 2 60 degrees
step 3 additional 60 degrees


johnjnail_31.jpg

May 26, 2011 | 1998 Hyundai Elantra

1 Answer

What are the torque settings of the j2 1.8GLS 1996 hyundai elantra


cylinder head bolt torque

10 mm bolts

step 1 22 ft lbs
step 2 additional 60 degrees
step 3 additional 60 degrees

12 mm bolts

step 1 26 ft lbs.
step 2 additional 60 degrees
step 3 additional 60 degrees

exhaust manifold nut 32-41 ft lbs.

intake manifold nut 11-15 ft lbs.

rocker cover 71-86 in. lbs.

Dec 14, 2010 | Hyundai Motor 1996 Elantra

1 Answer

I need the cylinder head torque settings for 1997


1998 Hyundai Lantra "G4GM" engine 1795cc.there are two heads or blocks, one is called the M10, other is the M12, figure out which one you have cause the torque is different for stage one by 5nm........... Dont get confused theres 2 different engines so 2 different torques for stage1---------
heres the full details: Stage 1 - m10 = 30nm / m12 = 35nm-------------------------- -------- Stage 2 - tighten by 60-65 degrees ------------ stage 3 - tighten by 60-65 degrees. no sequence is given in the data book for tightening so go off what you thinks right, it doesn't matter on this engine.

Nov 17, 2009 | 1997 Hyundai Elantra

4 Answers

Head bolts torque settings


According to my haynes manual for G-S reg, 1989-1998 it goes as follows,
Stage 1:- Tighten all bolts by hand until bolt heads just contact cyl. head.
Stage 2:-Tighten all bolts to 40Nm or 30lb ft.
Stage 3:-Angle tighten all bolts a further 60 degrees.
Stage 4:-Angle tighten all bolts again a further 60 degrees.
Stage 5:- M12 x 140mm bolts ONLY angle tighten a further 20 degrees.
Hope this helps everyone, sorry it seems longwinded but that is how it's written in the manual.

Oct 26, 2008 | 1995 Land Rover Discovery

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...