There were 2 directions that I found. Here they are:
Second one is:
Step 1
Turn the key in your ignition to "ACC." Do not start the engine.
Step 2
Press the "Step" button. This button is located on the instrument panel under the display that tells you how many miles until the car needs to have the oil changed again.
Step 3
Press the "Reset" button until the display shows "3000 Miles to Service."
Turn the key to the "OFF" position and remove it from the ignition. The oil monitoring system has been reset.
Hope this solves your issue.
SOURCE: Will a bad oil cooler cause water to mix with the oil on a 05 chrysler pacifica touring
usually when you have water in your oil, its an indication that either the head is cracked, the head gasket is blown or the block is cracked. allowing the water to enter the oil system.
249 views
Usually answered in minutes!
×