Cars & Trucks Logo

Related Topics:

Since I can't get a straight answer out of anyone and infinitis seem to be this freaking mysterious unfixable thing, I got one last question. I have an 04 Infiniti i35. It's in lockdown mode. I absolutely refuse to go to the dealer. I've hired a locksmith at the tune of $240, he came out, made a new key and it started like 5-7 times and then lockdown , called the guy back and he did it again for another $100, same thing, 5-7 times and lockdown. I have bought a ton of little things to do it somehow myself. I believe I have the right combination now. I bought a reprograming kit and have watched the YouTube videos, though none are of Infiniti, anyways, one good one said to look for the ic900 chip in my ecu, said it was standard on most ecm's, but again, we're talking about Infiniti now, so of course not... I have magnified, combed over with a fine tooth comb and even taken close pics and magnified those and found no such chip. Can anyone please tell me what the equivalent of my cars chip is. Supposedly a 6 or 8 leg chip

5 Related Answers

Anonymous

  • 39 Answers
  • Posted on Mar 17, 2009

SOURCE: Key chip reader not letting Ford Fiesta start

ok here is what i suspect. your keys have a set electrical resistance. that is what the chip on the side of them is for. it changes the resistance of the key. when you put it in your ignition it completes the passlock circuit allowing your car to start. for some reason either your keys are no longer the correct resistance or your passlock circuit is broken somewhere. possibly could be a computer "glitch". there are so many factors on this one it is going to be almost impossible to fix without putting it on a scan tool and seeing what your passlock system is doing. your best bet is to take it to a shop but i am sure you already heard that one. in the best case you may be able to find out what the resistance of your key is and have your passlock reset to that resistance.

Ad

Anonymous

  • 58 Answers
  • Posted on May 05, 2009

SOURCE: How to program 2002 i35 infiniti keyless remote?

The procedure goes like this. First get in the car and lock all the doors. Secondly insert and remove the key repeatedly until the turn signal indicators on the dash flash twice simultaneously, it should be like seven or eight times. Then turn the key on and press the lock button on the remote and the lights should flash again. After that turn the key off and manually unlock and open the drivers door, then shut it. Wait a few seconds then try the remote. 

Anonymous

  • 58 Answers
  • Posted on May 27, 2009

SOURCE: When is a good time to replace the timing belt/chain on I35

I35's do not have timing belts. They have timing chains and do not need to be replaced. The only Infiniti vehicles with timing belts are the J30 and the QX4. So whoever told you that you had a belt doesn't know what they are talking about. 

Anonymous

  • 2004 Answers
  • Posted on Aug 25, 2009

SOURCE: 2008 infiniti g37 motor is knocking has 16500 miles on it.

Please change the oil now at the Nissan garage and watch the vehicle closely.

$100 is not so much like getting your car totally knocked.

Good luck and rate this solution/ suggestion.

Anonymous

  • 8 Answers
  • Posted on Oct 24, 2009

SOURCE: I tried Penzoil synthetic 5w30, is this a good oil

some of the nissan/infiniti 3.5L engines have been known to have internal ring/valve seal problems therefore you should either keep a quart or two in your trunk or think about selling it.You should change your oil a little early because synthetic oil tend to break up sludge in your engine the first time it is introduced.Longer intervals are ok after that.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

O7 camry gurgling noise when shut off after driving it, water antifreeze leaks out, found it was coming from a heater hose leaking doesnt seem right to me??

Gurgling when shut off could be (as on my car) the radiator's overflow bottle feeding back into the radiator as it cools, or still boiling into overflow bottle if very hot.
Heater hose should be renewed ASAP as coolant loss may be causing overheating / gurgling and will likely cause major damage to engine if left unfixed.
Is hose cracked?
Might just need re-sealant and hose-clamp.
If you seal allow several hours to set completely otherwise steam pressure could push wet sealer out.
Is this helpful?
0helpful
1answer
0helpful
2answers

My Infiniti g37 jolts foward when I'm breaking for

I am not sure I know what you mean. Are you talking about when you are braking the pedal pulsates?
0helpful
1answer

2004 Infiniti G35 w/77k miles would not accelerate

try checking your throttle boddy connection just blow on it a bit. =] I dont know what will happen if there's something wrong with the sensor.
0helpful
1answer

Driver and passenger mirrors on my 1996 Caprice Classic

THIS IS THE FIRST TIME I HEARD THIS. THE MRRORS MUST BE SHAKED A LOT BEFORE TO RELEASE THAT WAY. IF YOU NOTED IT YOU COULD FIX ON TIME
Not finding what you are looking for?

358 views

Ask a Question

Usually answered in minutes!

Top Infiniti Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...