Under valve cover most likely has timing belt to turn it
SOURCE: 2001 kia sportage blower motor resister
Rule of thumb...unless you get a better answer: look for a couple of wires on a small plate that is in the airflow of the fan on the heater/ac unit. The resistor pack is always air cooled by the fan.
SOURCE: Change Belts on 1997 Kia Sportage
first loosen your altenator and take that belt off over the fan then the skid plate off the bottom and there is a tensioner pulley there for your a/c belt then your p/s belt loosens from the power steering pump pulley just turn the bolt counter clockwise and itll come off thats how my 99 works
SOURCE: Hav Kia Sportage 1997. Alarm system not working
The alarm system is under the console,it can be crossed out on the right wires.
SOURCE: timing belt diagram 1997 kia sportage 4x4
My scanner isnt working, so i hope this can help you out some...On the left Camshaft..you will a stamp I and E...iI is for intake and E is for exhaust..The I should be up at 12 o'clock and the E should be at 4..you will also have marks on the timing plate behind the camshafts to help you line it up right...Now on the Right Camshaft you will have the same marks, but this time you want the E at 12 and the I at 7 o'clock..And the crankshaft should have a little notch on it, where you can line that up at 12 o'clock with the notch imprint that is on the plate for you..You may have to clean those areas, and use a light, so you can see them..I hope this helps you out..Goodluck...
SOURCE: how to adjust the clutch of a 1998 kia sportage
clutch is located at the one side of the engine just tight the screw located there do ur work along with one more person so that he can clarify that it works properly
70 views
Usually answered in minutes!
×