Check the tire pressures for your vehicle on the inside of the driver door. If the correct pressures don't reset this light you may have a bad sensor inside the tire. This is not an average guy type fix because you can't tell which is bad without the right sensor reading tool and the new sensor has to be calibrated to the car. Les Schwab may do these.
SOURCE: check tire pressure light reset, 1999 Grand AM
Pop the fuse panel cover off the driver side fuse box, you have to open the door to get to it. With the key in the ignition and in the "ON" position, hold down the button in the fuse box that says "reset". The Tire Pressure or Oil Change light will start to blink, let go and push it one more time and the light will go off.
gaframe = true;
' +
'' + google_ads[i].line1 + '
' +
'' + google_ads[i].line2 + ' ' + google_ads[i].line3 + '
' +
'' +
google_ads[i].visible_url + '
';
}
}
var adsByGoogleRight = "-40px";
if(dartRecieved){
document.getElementById("ga_300x250").style.clear="both";
document.getElementById("ga_300x250").style.left = "0px";
document.getElementById("inner_adv_caption").style.display = "block";
document.getElementById("ga_300x250").style.width = "370px";
adsByGoogleRight = "5px";
}
else if(isHealthinationExist){
var healthinationBox = $('healthonationBox');
if(healthinationBox){
var helthinationBot = getObjXY(healthinationBox)[1]+healthinationBox.clientHeight;
var ga_top =getObjXY(document.getElementById("ga_300x250"))[1];
if(ga_top-helthinationBot >0){
document.getElementById("ga_300x250").style.width = "530px";
}
else{
document.getElementById("ga_300x250").style.width = "410px";
}
}
$('boxAdWrapper').style.display = "none";
}
else{
document.getElementById("ga_300x250").style.width = "530px";
$('boxAdWrapper').style.display = "none";
}
//add "ads by google"
var logo_img = '';
s += '' + logo_img + '';
document.getElementById("ga_300x250").innerHTML = s;
var currl = $('related_links');
var currq = $('related_questions');
if(currl!=null && currq!=null){
var currltop = getObjXY(currl)[1];
if(currltop > rltop )
currq.style.clear="left";
}
return;
};
//-->
SOURCE: Tire pressure light is on
You cannot reset them,Make sure that you check the pressures in the tires. The Infiniti Tire Pressure Monitoring System is designed to trip the warning light anytime the pressure in any of the tires drops below 29 psi. At 29 psi it really won't look like the tires are low. You could have one tire at 29 or 28 causing the light to stay on all the time. Check your pressures, set at 34 or 35 to be safe, or whatever pressure the tire is recommended to be. Not all infiniti vehicles with TPMS have the display that shows the pressure in each tire. If the pressures are above 29 psi, Then there could be an issue with one or more of the sensors. If you have the tires replaced you will have to have the sensors relearned at the dealer. Tire rotations do not require the same.
SOURCE: how to reset tire pressure sensor light on 2007
To reset the tire pressure light you need to get the tool.
You can get the tool here on link below.
http://cgi.ebay.com/ebaymotors/FORD-OEM-TIRE-PRESSURE-MONITOR-RESET-TOOL-TPMS-RESET_W0QQcmdZViewItemQQhashZitem45eed5e149QQitemZ300359737673QQptZMotorsQ5fAutomotiveQ5fTools
SOURCE: 2004 Honda CRV Check Engine light
the check engine lamp is not affected by things like tyres, brakes etc. It shows that the vehicles engine management system had detected a fault with the engine or engine sensors. Check the engine for broken or disconnected wiring (maybe it was disconnected during the replacing of the hoses but not reconnected). If you fail to locate anything, check the manual for the correct fault code retrieval procedure or take the vehicle to a professional. Tyres may affect your ABS system or Airbag systems but they usually have their own warning lamp and are unrelated to the check engine lamp..
SOURCE: 2006 Nissan pathfinder tire pressure
press and hold the tire pressure reset button for 5 sec or until u see the light flash
75 views
Usually answered in minutes!
×