Need 99 Jeep serpentine belt replacement diagram 4.0 motor

SOURCE: serpentine belt diagram?

Should be a diagram sticker in the engine compartment, either under the hood or around the top of the radiator.

SOURCE: diagram for 1998 Jeep right hand drive serpentine belt

http://www.fixya.com/cars/t2857543-need_diagram_serpentine_belt_replacement here is a link that should help u

SOURCE: 99 Beetle Serpentine belt diagram

The serpentine belt on my 2001 Beetle loops around the outside of the large pulley closest to the firewall, at the bottom, then goes around the outside of the forward lower pulley, then crosses to the inside of the one right above the forward lower pulley, then loops over the outside of the alternator pulley at the top front side, then goes inside under the tensioner pulley, and back down to the outside of the big rear pulley.

I hope that description makes sense. A picture would work a lot better, but I don't have an easy way to post it. Also, I know you asked about the '99 Beetle, but I assume its routing is the same as the 2001 (which is the one I have).

SOURCE: replace serpentine belt on a jeep grand cher w/4.7 liter engine

It's posted inside the hood. Lift hood, look on passenger side.

ZJ Limited

• 17989 Answers
• Posted on Apr 09, 2010

SOURCE: i need diagram for serpentine belt installation on 1999 jeep .

Check HERE for few engine sizes:
- 1999 JEEP WRANGLER - L4 2.5L 150ci GAS FI N P
- 1999 JEEP WRANGLER - L6 4.0L 242ci GAS FI N S

Hope this help (remember comment and rated this post).