I want to relace Fuse F73 in a fiat punto grande what do i do

SOURCE: lighting problem fiat punto

Then there will be some wrong connection of wire
between the indicator and the break light.
thanks..

SOURCE: fitting a wing mirror on the passenger side of a fiat punto

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Dan Doherty

• 1099 Answers
• Posted on Jan 13, 2010

SOURCE: how do i replace the fuse on a fiat punto

look inside the car pull the fuse box cover off, it has a diagram on the embossed into the plastic there will be a picture of a windscreen wiper moving, check the line and position relative to the location on the fuse box. most times it by the drivers right leg just under the steering wheel looks like a plastic cover sometimes they have screws but this model should just pull off. check your user manual for the location of the fuse box if you have one.

SOURCE: how do i replace a headlight on a fiat punto

how to change headlight for fiat punto 2000

SOURCE: hi i have a remote key for my fiat grande punto

It's not a DIY job and needs specialist equipment.

Take the car along with ALL remote keys to a Fiat main dealer. Any keys you do not take along will not work afterwards. Fiat can then program the vehicle and remotes as a matching set.

Note that it's worth shopping around for this: it doesn't take much time or labour so there's likely to be a wide variation in pricing. You can also try asking independent automotive locksmiths whether they can provide the service: many can these days but there are also plenty who haven't invested in the technology needed to do the job.

Testimonial: "thanks ill have a look in the local thomson"