Radio 12v blue/yellow + radio harness
Radio Ground brown - radio harness
Radio Ignition gray + radio harness
Radio Illumination green + radio harness
Factory Amp Turn-on N/A
Power Antenna N/A
LF Speaker +/- pink - purple +,- radio harness or amplifier
RF Speaker +/- lt. green - blue +,- radio harness or amplifier
LR Speaker +/- black - yellow +,- radio harness or amplifier
RR Speaker +/- red - white +,- radio harness or amplifier
Notes: If equipped, the amplifier is on the passenger side rear cabin wall.
The wires going into the MAF are as follows:
White/Red = Ignition voltage
Blue/Black = E2
Black/White = E2G
Yellow/Green = THA (This is the IAT signal to the PCM)
Gray = VG
3,551 views
Usually answered in minutes!
×