Question about Dodge Ram 1500

1 Answer

2013 Ram 1500 with 5.7 hemi it through the code random misfire and throttle body actuator to change the throttle body

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 492 Answers

Misfire codes a lot of times will be your individual coil packs. Not sure how many miles you have on your truck, but around 70 to 80 thousand miles you may start getting codes of misfires because your coils are starting to break down. Could also be a combination of coil and spark plugs. If it were my truck and it has high mileage, I would replace all the coil packs, and the spark plugs, and while I had it apart would clean the throttle body which is fairly easy to do.

Posted on Aug 12, 2019

Ad

6 Suggested Answers

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: 04 dodgebram 1500 hemi stalls some times

Check the throttle body---if it is very dirty it causes the air flow to change and causes stalling --cleaned mine and no problems / also change PCV valve go to hemitruckclub.com and lots of tips and fixes..........

Posted on Mar 11, 2009

Robert Debison

  • 412 Answers

SOURCE: Where is the throttle position sensor at on a 2005

THIS ENGINE HAS ELECTRONIC THROTTLE CONTROL..THERE ARE 2 THROTTLE POSITION SENSORS LOCATED IN THE THROTTLE BODY,COMPLETE ASSEMBLY MUST BE REPLACED IF DEFECTIVE..IT ALSO HAS SENSORS IN THROTTLE PEDAL ASSEMBLY AS WELL..WHAT TROUBLE ARE YOU HAVING?

Posted on Jul 09, 2009

Anonymous

  • 249 Answers

SOURCE: replace timing chain on 03 dodge ram 1500 with 5.7 hemi

i have an 02 and i purchased a repair manual from autozone

Posted on Jan 05, 2010

Anonymous

  • 83 Answers

SOURCE: 2005 Ram 1500 4wd HEMI PO406 - EGR

Hey greenlee99, your best bet would be to grab one these manuals so that you have pictures and diagrams along with step by step instructions. It will tell you what tools and parts you need. Can't go wrong with having it.

Posted on Feb 15, 2010

Anonymous

  • 18 Answers

SOURCE: Throttle/Pedal Position Sensor/Switch

typical problem, replace the TPS (Throttle Position Sensor) it is located directly opposite of the throttle cables on the throttle body. 2 bolts save the bolts for the love of god SAVE THE BOLTS they are "trilobal" and come verry much in handy later. but it is an easy 10 minute fix and if my memory is correct they are torx head bolts from factory.

Posted on Mar 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2006 GMC 6.0 it's showing me three codes , it quits an goes into limp mode , the codes are P0300 p1516. Bo229 can you help me out with this


p0300 is random misfire and p1516 is throttle actuator performance of voltage issue. you may have a faulty throttle actuator which is causing the random misfire. the b0299 is a fault related to a body component which may or may not be related to the primary "p" codes.

Aug 28, 2014 | Cars & Trucks

1 Answer

04 DODGE Ram hemi cylinder 3 misfire


Check engine compression and compare. then test running engine compression most engines have about 130-170 cranking compression and about 90-110 running compression. OR bring that cylinder to its Top Dead Center compression stroke apply air to the cylinder and check to see where the air is going open throttle plate bad intake valve, from exhaust pipe bad exhaust valve, from oil cap piston rings.

Mar 23, 2014 | 2004 Dodge Ram 1500

1 Answer

Where is throttle position sensor located on 2003 dodge ram 1500 5.7 hemi


The 5.7L V-8 engine does not use a seperate TPS on the throttle body

Jul 29, 2011 | 2004 Dodge Ram 1500

3 Answers

I have a 2007 Dodge Ram 1500 with the 5.7 HEMI/MDS engine.If I shut the engine down when hot and then restart within a short time the idle goes up and down by about 100 RPM.It settles itself out after...


YOU COULD BE HAVING ENGINE MISFIRE.DUE TO BAD SPARK PLUGS AND WIRES.ALSO DIRTY FUEL INJECTORS WILL CAUSE ENGINE TO ROUGH IDLE OR IDLE UP AND DOWN.PUT A BOTTLE OF FUEL INJECTOR CLEAN IN A FULL TANK OF GAS.ALSO CHANGE PLUGS AND WIRES.IF TRUCK HAS 30000 TO 60000 MILES ON IT.THATS THE SCHEDULE MAINTENCE INTERVALS IF SPARK PLUGS HAS NOT BEEN CHANGED.

Feb 14, 2010 | 2005 Dodge Ram 1500

1 Answer

Where is the throttle position sensor at on a 2005 Dodge Ram 1500 Hemi 5.7L v8?


THIS ENGINE HAS ELECTRONIC THROTTLE CONTROL..THERE ARE 2 THROTTLE POSITION SENSORS LOCATED IN THE THROTTLE BODY,COMPLETE ASSEMBLY MUST BE REPLACED IF DEFECTIVE..IT ALSO HAS SENSORS IN THROTTLE PEDAL ASSEMBLY AS WELL..WHAT TROUBLE ARE YOU HAVING?

Jul 09, 2009 | 2005 Dodge Ram 1500

1 Answer

2003 dodge ram hemi throttle control problem


try getting some throttle body cleaner from you parts store, and give your throttle body a good cleaning. I just did that my self, after taking off the air filter unit off and the "HEMI" box (sorry i don't know what that's called) you will have good access to your throttle body. With the engine off, prop open the throttle body with a wedge, and you will see it black. When you spray the cleaner it will desovle right away, if not a soft brush maybe a old toothbrush and srcub. Also spray the air box, tube, and "HEMI" box. When you start it again it will run a little wierd but let it run for a couple minutes, turn it off then restart. Should be good as new.

Jun 22, 2009 | 2004 Dodge Ram 1500

1 Answer

04 dodgebram 1500 hemi stalls some times


Check the throttle body---if it is very dirty it causes the air flow to change and causes stalling --cleaned mine and no problems / also change PCV valve go to hemitruckclub.com and lots of tips and fixes..........

Mar 11, 2009 | 2004 Dodge Ram 1500

3 Answers

Electronic Throttle Control


DTC P2106 Throttle actuator control system-forced limited power DETECTION CONDITION
• The PCM monitors the throttle actuator control current when the ignition switch is on. If the control current is less than 8 A or more than 11 A, the PCM determines that the throttle actuator control system is under forced limited power. Diagnostic support note
• This is a continuous monitor (CCM). • The MIL illuminates if the PCM detects the above malfunction condition in the first drive cycle. • PENDING CODE is available if the PCM detects the above malfunction condition. • FREEZE FRAME DATA is available. • The DTC is stored in the PCM memory. POSSIBLE CAUSE
• Throttle actuator malfunction • Connector or terminal malfunction • Open circuit in wiring harness between throttle body terminal A and PCM terminal 1B • Short to power supply in wiring harness between throttle body terminal A and PCM terminal 1B • Short to GND in wiring harness between throttle body terminal A and PCM terminal 1B • Open circuit in wiring harness between throttle body terminal B and PCM terminal 1C • Short to power supply in wiring harness between throttle body terminal B and PCM terminal 1C • Short to GND in wiring harness between throttle body terminal B and PCM terminal 1C • PCM malfunction
and for the other one

the dealers need to reflash the powertrain module ( ETC ) ...

hope i'll not get that problem on my 04 hemi...

Dec 19, 2008 | 2004 Dodge Ram 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...