How do i top up gearbox oil on suzuki alto, 1999 gl, 1.0, 5 speed manual?
....
The bolt to fill with oil is on the front of the gearbox, under de
left light. You must refill to the level of the bolt...
I hope help you with this. Good luck.
Hi on top of the housing towards the left there's a plug unscrew and fill thank you if this information has been useful please let us know thank you
Hi just would like to know if you resolved the problem with the lube on your tranny if so please let me know for further information thank you
What size torque bit do you need please?
×
Open gear box to add oil by 'fill bolt' on the side of gear box. Add oil until it just starts to run out of fill hole. Replace bolt and tighten.
If you need further help, I’m available over the phone at https://www.6ya.com/expert/craig_3fa289bf857b1a3c
There will be 2 plugs on the side of the crank case, one will be low enough to drain the fluid, the other will be higher near the operting line.
loosen the plug and top off the fluid.
Happy motoring
7,881 views
Usually answered in minutes!
No the nut was not there.
thats not enough information, it just shows a picture
not enough information for me. need reply with more detail. I know where the whole to drain the transmission oil is. Just need the hole where I put in the new GEARBOX oil
I really need a answer with a picture showing the location of teh refill hole.
Hi
I found out the location of the filling hole from a suzuki car manual athttp://www.scribd.com/doc/6692092/Alto-O... It gave a illustartion with detailed notes.
Thanks
Can't find engine no on suzuki alto 1997 model
×