What gap should you allow for the tappets 1.2 renault clio 2000

I got this free Pdf manual from reliable-store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the 20 times I fixed the chipper in these 4 years

0.1mm inlet 0.25mm exhaust engine cold

There are Garage websites out there now which allows you to put in the repair and garages will contact you with a price locally. According to which model clio you have the clutch kit on ebay are from 40 - 80 pounds in the UK .
Contact a local independent garage or mechanic for a price .

would need to see it sorry,could be anything or everything as it is a renault with encrypted software ,check the obvious first like spark plug gaps ,25th then if still the same maybe the coil pack

you are correct ,try 12th inlet and 14 exhaust

Have you re-connected the plugs in the correct firing order (1-3-4-2) ?

Did you make sure the plug gaps were set correctly?


Here's a url for the Renault forum website, loads of good info:--

http://www.renaultforums.co.uk/

hi from the uk i can scan and e mail you the full instructions and diagram ofbelt timing+marks for alignment plus correct tensioner setting if you send me your e mail address ? best wishes from n/west uk

Your code is 1498

Try pressing the D3 button on your gear shift - little button below the main one. D3 allows for quick acceleration, but the light also shows when the car is locked is gear ('limp home mode') due to another problem.

lose u r tapptets upon the gape of paper width size.... it consume low feul and noisless