The codes can be retrieved by turning your ignition switch on and off three time quickly and watch your service engine light. It will flash once pause then flash twice then it will begin to give any fault codes that have been stored. It will flash once or twice then pause then flash in concession again then pause and start another code if any. When you have retrieved all the codes available it will flash 5 times pause then flash 5 times which means it has finished. There are several sites on the net that will explain what each code stands for and which circuit needs your attention.
Autozone can pull codes for free.
The onl way to deal with such is , take it to an shop who owns a code scanner and he will tell you what wrong with your vehicle.
You need to get a code reader and get the trouble codes. More info - http://www.check-engine-light.com
SOURCE: service engine soon
Our 2001 mitsubishi montero xls ran hot and blew a head gasket.We just got it back and it rus great but has a little shimey or puttin when we are sitting at a light,as if it is idle to low.Put it in park and it runs smoother. Idle sensor or throttle sensor got damaged from the heat? Not sure...just thinking out loud! Any other suggestions?
SOURCE: Service engine soon light.
Hi:
There are hundreds of things that trip that light. You need to have your vehicle codes scanned to see what has caused it. Most auto parts stores will do this for free. It could be something as simple as a loose gas cap, but this is an easy way to figure it out!
Testimonial: "Thanks. I wasn't aware this service was free. Much appreciated."
726 views
Usually answered in minutes!
×