Front bumper on my 02' honda civic is not sitting right, big gap between the front right headlight and the bumper.. The gap is in the corner.. Also the bumper seems to be loose, checked all the bolts, they are nice and tight. Also the front hood is not sitting right with grille... What do i need to do to fix this, i did take off my bumper and put it back on to see if that would help, but it didnt..

SOURCE: 1998 Dodge Dakota engine compartment/chassis assembly dwgs.

hello , you could take a look at our products section , our look at the related links , thank you for using fixya.

SOURCE: front bumper

To remove the bumper on a honda civic;

1. open your hood and unscrew 3 screws ( some have plastic catchers).
2. there is another bolt above your front tyre, you have to unbolt that..(right above the tire, by your mudguard or whatever they call that plastic piece to stop mud or water to get in contact with wires on the door.)
3. same on the other size...
4. you are good to go then...good luck..

SOURCE: grill compatability

If it is the same year

Colin Stickland

• 22516 Answers
• Posted on Dec 28, 2008

SOURCE: vehicle accident

follow your nose,you will find them on the car somewhere,and next time keep a safe distance

SOURCE: replacing the hood release cable.

When you open the hood, remove the plastic clips. they're should be around 5 or 6 of them. after that they're are 2 10mm screws on the bottom of your car. remove those. After you remove those. Then at the end where the fender connects to the bumper on both sides they're are 2 phillip screws.