How do you reset a anti-theft system on a 1998 jeep grand cherokee limited 5.2 v8.

All questions need 'year make model' as first 3 words in every question.

When you remove the vehicle battery, or the fob battery, you have to reset the security system and engine immobilizer.

Google

year make model reset security

Press and hold the "Unlock" button on your remote, and then press and hold the "Panic" button while still holding "Unlock." Hold both buttons together for one second and release.
Mar 22, 2022

How to reset the anti theft system - 1999-2004 Jeep Grand ...

iFixit https://www.ifixit.com > Answers > View > How+to+reset...

How do i reset the Jeep Wrangler security?

Vehicle History https://www.vehiclehistory.com > questions > how-do-...
Jul 30, 2020 - To reset the Jeep Wrangler safe, use the ignition key to turn your car on and keep the red toggle switch on the alarm system. Wait until the ...

2 answers · Top answer: To reset the Jeep Liberty's anti-theft system, pull on the driver's handle and unlock the driver's door manually with the chipped key. You can also depress ...

How do i reset the 2003 Jeep Grand Cherokee anti theft ...

Vehicle History https://www.vehiclehistory.com > questions > how-do-...
To reset the alarm on the 2003 jeep grand cherokee you need to lock all the doors, then unlock the driver side and put the key into the on position. Now turn it ...

7 answers · Top answer: Resetting the 2003 Jeep Grand Cherokee anti-theft system is very easy to do, and it will only take around 5 to 7 minutes out of Your day. The first thing ...

How to disarm And reset the anti theft on a 2017 Jeep Patriot

YouTube https://www.youtube.com > watch

2:30
How to disarm And reset the anti theft on a 2017 Jeep Patriot. 12K views · 3 years ago ...more. GEE WizZ. 23. Subscribe. 23 subscribers.
..

sounds like the anti theft system is activated , proberly cuts the power to the fuel or ignition follow this link for reset procedure
How to Reset the Anti Theft on Jeep Cherokee eHow

disconnect the anti theft system

Hi Andrew:
The 1994 Jeep Grand Cherokee Laredo Anti-Theft System is equipped with Vehicle Theft Security System (VTSS). VTSS system monitors vehicle doors, hood, liftgate and ignition. If an attempt is made to enter or operate vehicle without proper disarming of system, vehicle horn will sound, headlights, taillights and parking lights will flash, and engine will be prevented from running. I have an '93 GC 5.2L V8...

The following wiring diagram and electronics circuit contains detail schematics of The 1994 Jeep Grand Cherokee Laredo Anti-Theft System. Herein you will find interconnection between electronics parts of the system such as body control module, auto headlamp light sensor. VTSS led, driver door module, passenger door module, cylinder lock switch, junction block, power distribution center, and grounding. Herein you will learn also how the Vehicle Theft Security System works, removal, installation, testing and troubleshooting procedures.

Try HERE and also, remember that here can find the Jeep Grand Cherokee Service Repair Manual.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

I suggest check this link for additional details... Jeep-Grad-Cherokee-Anti-Theft-System

I also have one Grand Cherokee 5.2L V8.

Good luck (rememeber to rate and comment this)

Nices Jeep model, I have the same year with 5.2L V8 engine; visti the next link to know details about 93ZJ-Secc-8Q-Vehicle-Theft-Security-System

Hope this helps.

I suggest check the procedure for antitheft system in this link: Jeep-Grad-Cherokee-Anti-Theft-System

Hope helps (remember to rate this answer).

Yep, its possiblke that you have any proboem with the THEFT system; check in this LINK information about disarm it: 1996-Jeep-Grad-Cherokee-Anti-Theft-System

Keep in mind that the Grand Cherokee '93 at '98 keep the same features 8I have '93 GC Limited and this procedure work for me).

Good luck (remember to rate and commene this answer).

For the 1998 Jeep Grand Cherokee Laredo:
I do not know if you have the 4.0L In-Line 6-Cylinder, the 5.2L V8, or the 5.9L V8; however I have included ALL below:

For the 4.0L In-Line 6-Cylinder:
Firing Order:
1-5-3-6-2-4
Cylinders:
(back)
...6
...5
...4
...3
...2
...1
(front)

Distributor:
....(back)
.....5....3..(+)-screw
1.............6
(+).4....2

For the 5.2L V8: AND 5.9L V8:
Firing Order:
1-8-4-3-6-5-7-2
Cylinders:
.......(back).......
|..8..|.........|..7..|
|..6..|.........|..5..|
|..4..|.........|..3..|
|..2..|.........|..1..|
.......(front)
Distributor:
.....(back)
.......3
..4.........6
8.............5
..1.........7
.......2
......(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

The 1996 Jeep Grand Cherokee Laredo Anti-Theft System is equipped with Vehicle Theft Security System (VTSS). VTSS system monitors vehicle doors, hood, liftgate and ignition. If an attempt is made to enter or operate vehicle without proper disarming of system, vehicle horn will sound, headlights, taillights and parking lights will flash, and engine will be prevented from running.

The following wiring diagram and electronics circuit contains detail schematics of The 1996 Jeep Grand Cherokee Laredo Anti-Theft System. Herein you will find interconnection between electronics parts of the system such as body control module, auto headlamp light sensor. VTSS led, driver door module, passenger door module, cylinder lock switch, junction block, power distribution center, and grounding. Herein you will learn also how the Vehicle Theft Security System works, removal, installation, testing and troubleshooting procedures.

Try HERE.

Also, remember that here can find the Jeep Grand Cherokee Service & Repair Manual.
Hope help with this.