Nissan 2.5 repair code po335-po725 car shot off while runing

you need to replace crank position sesor.about 50.00 and an hours labor(pain in the *** wait till you see where they put this thing!)very common falure on these....should have come with a replacement in the glove box when they sold them new!

Mar 08, 2011 • 2005 Nissan Altima

2helpful

1answer

Car cuts out whiles driving and does not start for a while

im pretty sure if you have someone check the engine computer for fault codes youll find either a po335,po725 or po340.these relate to failures with your crankshaft and camshaft position sensors.relatively inexpensive fix at the outset 250.00 to replace both.i would recommend replacing both as they are identical sensors and acommon source of trouble on these models.

Feb 21, 2011 • 2003 Nissan Altima

1helpful

1answer

I have a po725 code on my altima and went to auto zone and look at a picture of the speed -engine sensor and it different than the crank sensor for the po335-where is it

P0725 IS A BREAK CODE CHECK YOUR INTERLOCK SWITCH THE TRANSMISSION NEEDS TO KNOW WHEN THE BREAKS COME IT IS CONTROLED BY THE GEAR SHIFT LEVEL YOU NEED IT FOR CRUISE CONTROL ITS ON THE SIDE OF THE TRANSMISSION IT MOVES EVERY TIME YOU MOVE THE SHIFT LEVEL ITS A WARE PART AND YOU GET FUNNY PROBLEMS WHEN THEY DO THERE 20 TO 30 DOLLARS

Oct 15, 2010 • 2005 Nissan Altima

8helpful

1answer

Codes

PO725 = Engine Speed Input Circuit
PO335= Crankshaft Position Sensor A Circuit

Apr 19, 2010 • 2002 Nissan Altima

1helpful

2answers

Trouble codes PO725 and PO335, car jerks hard during steady speeds on highway intermitently I am told the speed sensor by local parts stores and a revolution sensor by my local dealer. I am not sure which...

Nissan has reproduced the crank sensors installed in all altimas 2004 and up. it was deffective. Its also sort of difficult to access. take off the intake tube, dissconnect the throttle body connector. and reach to the bottom of the engine right next to the motor mount.take the connector off and see if the feel for oil. There will most likely be oil on the connector. Replace sensor

Sep 16, 2009 • 2005 Nissan Altima

0helpful

1answer

Scan Code po725 and po335 coming up

put these codes one at a time on google search and your answer shall appear

Sep 12, 2009 • 2004 Nissan Altima

1helpful

1answer

I am getting the PO335 (crank shaft position sensor A circuit malfunction) code on my 2006 Nissan Altima 4 cylinder--what does that mean? thanks for any help! I am also getting a PO725 code-but I read that...

sounds like ya should replace the crank sensor, call dealer an see what they got

Aug 05, 2009 • Nissan Altima Cars & Trucks

Question 2

Anonymous

Expert 291 Answers
Posted on Sep 01, 2009

Anonymous

Expert

Joined: Aug 30, 2009

Answers

291

Questions

8

Helped

122657

Points

964

FIRST THE P0335 CODE IS A CODE FOR LOSS OF CRANK SENSOR SIGNAL... MOST OF THE TIME YOU NEE TO REPLACE THE CRANK SENSOR... NEXT THE CODE P0775 IS FOR A PRESSURE SENSOR CODE FOR TRANNY... ERASE THAT CODE AND JUST SEE IF IT RETURNS...NOT A BIG DEAL ON THAT ONE

Anonymous Sep 01, 2009

FIRST THE P0335 CODE IS A CODE FOR LOSS OF CRANK SENSOR SIGNAL... MOST OF THE TIME YOU NEE TO REPLACE THE CRANK SENSOR... NEXT THE CODE P0775 IS FOR A PRESSURE SENSOR CODE FOR TRANNY... ERASE THAT CODE AND JUST SEE IF IT RETURNS...NOT A BIG DEAL ON THAT ONE

×

Related Topics:

Trustworthy Expert Solutions

Nissan 2.5 repair code po335-po725 car shot off while runing

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Code PO725

My 2003 Nissan pathfinder codes po725 &po335 showed up on scanner, in addition the check engine light is on. Truck is stalling out periodically while driving

Replaced the crank sensor and the code came back

2005 Nissan Altima 2.5 engine. Service engine soon light came on. Car has jerked once on me driving down the highway. Got the codes and they are PO725 and PO335.

Car cuts out whiles driving and does not start for a while

I have a po725 code on my altima and went to auto zone and look at a picture of the speed -engine sensor and it different than the crank sensor for the po335-where is it

Codes

Trouble codes PO725 and PO335, car jerks hard during steady speeds on highway intermitently I am told the speed sensor by local parts stores and a revolution sensor by my local dealer. I am not sure which...

Scan Code po725 and po335 coming up

I am getting the PO335 (crank shaft position sensor A circuit malfunction) code on my 2006 Nissan Altima 4 cylinder--what does that mean? thanks for any help! I am also getting a PO725 code-but I read that...

Not finding what you are looking for?

2003 Altima

Code PO725

Ask a Question

Check Out the Latest Top Trucks Report!

Top Nissan Experts

ZJ Limited

Thomas Perkins

Arnie Burke

Are you a Nissan Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

Trustworthy Expert Solutions

Nissan 2.5 repair code po335-po725 car shot off while runing

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Code PO725

My 2003 Nissan pathfinder codes po725 &po335 showed up on scanner, in addition the check engine light is on. Truck is stalling out periodically while driving

Replaced the crank sensor and the code came back

2005 Nissan Altima 2.5 engine. Service engine soon light came on. Car has jerked once on me driving down the highway. Got the codes and they are PO725 and PO335.

Car cuts out whiles driving and does not start for a while

I have a po725 code on my altima and went to auto zone and look at a picture of the speed -engine sensor and it different than the crank sensor for the po335-where is it

Codes

Trouble codes PO725 and PO335, car jerks hard during steady speeds on highway intermitently I am told the speed sensor by local parts stores and a revolution sensor by my local dealer. I am not sure which...

Scan Code po725 and po335 coming up

I am getting the PO335 (crank shaft position sensor A circuit malfunction) code on my 2006 Nissan Altima 4 cylinder--what does that mean? thanks for any help! I am also getting a PO725 code-but I read that...

Not finding what you are looking for?

2003 Altima

Code PO725

Related Topics

Ask a Question

Popular Questions

Cylinder head removal on 2005 nissan altima 2.5

Turn off the i-key system error message in my 2013 nissan altima

Crankshaft Position Sensor Error P0335 recurred after r&r

Torque specs for 2005 nissan altima 2.5

Nissan Altima Water Leak

Check Out the Latest Top Trucks Report!

Top Nissan Experts

ZJ Limited

Thomas Perkins

Arnie Burke

Are you a Nissan Expert? Answer questions, earn points and help others

Manuals & User Guides