At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
How can I replace the side brackets to the front seats both are broken. We just bought it used looks like someone in the back seat got their shoes caught in it and it broke loose from the front side component seats. They are camel color.
not sure what you are refering to, but sounds like you need new seat frames.not sure what you are refering to, but sounds like you need new seat frames.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
most cars either has 2 bolts bottom front or you just push the front of the seat rearward and the bottom seat frame will slide back and up out of the bracket. look along the bottom front of the seat . folding seats may be a lot different usely in suvs and pickups.
look under seat and u will ee the rails on each side of seat rock seat back and forth to locate wich bolt is loose or broken or if the rail itself is broken if rail broken remove the seat and order or go to a junkyard for the rail
some of these , you would have to get in the back seat area. and push in on the bottom front side of the seat to allow the bracket that clips into another bracket to release, do this on both sides of the seat, and seat should release and come out, the top portion of a lot of these older models, you would have to grasp the top of the seat, and push in and up and pull out, on them to release them from the brackets, installation is reverse. hope that this information has helped you.
Release the two latches at the front of the seat cushion (pull back on the latches to release the front of the cushion).
Remove the seat cushion bolt and remove the cushion (it’s roughly in the center. You have to insert a socket extension between the back and bottom seat cushions to take it out, after you find it by pressuring the bottom cushion and looking back in there).
Remove the bolts (each side) securing the seat side bolsters (they are easy to see once the bottom cushion is removed), then remove the side bolters (gently release the clips that hold them in).
Pull the seat forward, then remove the fasteners securing the seat hinge (seat pivot bracket) and remove the seat backs.
This is a common BMW problem before giving to a mechanic try looking at the mechanism to see if any bolts are loose or missing,you might find the bracket is broken or torn and needs to be welded or replaced,the job is relatively easy but be carefull because of the SRS system if not sure give it to an expert.
the recliner is the outside seat hinge and has 4 bolts holding it to the seat cushion and seat back.The seat covers need to be pulled back to gain access to bolts.Can be done with seat in the vehicle.
It's under the rear seat on the right side of the car. Pull the two phillips screws at the front lower edge of the rear seat bench and lift the seat out from the front edge and then out. The battery is held down with a 13mm bolt and tall bracket. Cables are 10mm nuts.
You can buy the brackets or seat frame seperatly.
The thing is that you have to take the seat out and disassemble the whole thing to replace the bracket.
not sure what you are refering to, but sounds like you need new seat frames.
×