1999 GMC Jimmy Logo
Anonymous Posted on Aug 24, 2009

Best Spark plugs for a 1993 GMC Jimmy SLE Vortec V6 - Fuel Economy help!

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Master 386 Answers
  • Posted on Aug 24, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Apr 23, 2009
Answers
386
Questions
0
Helped
167901
Points
1328

AC 41803 Drivetrain:Four Wheel Drive;
@Gap .045" This is a Platinum High Performance Spark PLug


Option : ASP AR25
EngineVIN:W;
@Gap .045"@ High Performance

Stay away from those Gimmick Spark Plugs , they are just more money for nothing. A good platinum spark plug is all you need, the key is to gap it correctly to your application...

On GM products Vin # W it is .045 plug gap
On Gm products Vin # Z it is .035 plug gap

You will not have huge gains in fuel mileage from replacing spark plugs except to say that if your old ones are just extremely bad, there is no magical spark plug with extra mileage manufactured into it.... Hope this helps...

Testimonial: "Thanks for the reply. Spark plugs are pretty basic, but I would have fallen for the higher end. Assume I have VIN W as there is no Z in the vin number"

  • Anonymous Aug 25, 2009

    Glad to be of help, ask away in the future, always happy to help...

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

I've got a 1994 GMC Jimmy 4.3 vortec v6. The truck

You may also want to check inline fuel filters they may need replacing
1helpful
1answer

I have a 1997 GMC Jimmy with a 4.3L Vortec V6. It will turn over but won't start. It's getting fire and fuel. All the dash lights come on when the ignition is turned on and you can hear the fuel...

On the vortec engines they require 56 pounds of fuel pressure to start a few pounds shy of that you have a dead vortec you will need a fuel pressure guage to verify
1helpful
2answers

I have a 4WD 1998 GMC Jimmy 4.3L Vortec V6 and it started running hot then it shut off and wouldn't start back up... do you think there would be any way to fix without replacing the whole engine

IS THEIR WATER IN THE OIL? CHECK THE PLUGS TO SEE IF THEIR WET.YOU MIGHT PUT SOME PLUGS IN IT IF WET TO SEE IF IT WILL RUN.THEN PUT SOME HEADGASKETS ON IT.BUT IN REALITY NEW MOTOR WOULD BE BEST.
2helpful
2answers

My jimmy wont start have 58 psi of fuel pressure good spark but the spider injection wont open to spary the fuel brand new 280 bucks for it have checked grounds two broken one fixed those still no start...

check your ecm-ign fuse.if it is ok check to see if you have power to your spider injector.if you have power, you either have a bad computer or a bad connection between the computer and the inj.do you have spark??.if you have no spark check your ign module or bad connection at the ign module.i have seen that before.
0helpful
1answer

Car won't fire

if you have checked for spark at the spark plug end of the wire and it was not an sporadic,then you need to check the fuel pressure at the fuel rail reed valve,it should be at least 50psi ti start an engine thru the injectors
0helpful
1answer

Rough idle(rich) stalls in gear

Basically clean up before use like opening the plugs and adjusting the spark gaps, spray some carb cleaner at the intake & if The soud of the engine smoothens even slightly, then add some it to the fuel in the fuel filter & gun the engine a few time. Flush the radiator and fill in frsh coolant/water. Check the level of water in the battery and top up with distilled water. Clean the air filter and check fan belt tightness. After these small maintenace checks it should run OK.......sodeep
0helpful
1answer

Fuel prblem

the computer controls the fuel injectors.they should measue about 1.4 ohms each.
put fuel directly into the throttle body and see if it will start.
check the wiring to the safety netral switch and all the grounds.
make sure that the ecu is seeing an input from the ignition switch.otherwise it will not turn on the pump.it is a complex setup and you need a wiring diagram
Not finding what you are looking for?

755 views

Ask a Question

Usually answered in minutes!

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...