It only has one solid connection with 13 wires going into the module. There is no injector pulse. Computer hook up showed no indication as to why car wont startIt only has one solid connection with 13 wires going into the module. There is no injector pulse. Computer hook up showed no indication as to why car wont start
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
repairpal.com > Problems > Pontiac > Grand Prix Engine Stall Or No Start Condition on Pontiac Grand Prix. The fuel pump may fail ...No codes thrown... The car finally died on 8th avenue and 30th street in Manhattan. ...1996 Pontiac Grand Prix- 3.1L V6138,920Visitor. My car just decided it ...
or you getting the right fuel pressure? check fluid filter, check pressure regulator, check spark plugs to see if they are soaking wet if they or wet take them all out and pull fuel pump relay out turn engine over and blow all gas out the plug holes. install plugs and relay and try start again , check engine compression, check coolant senor ,check cam sensor
If you deffinitely have fuel and spark then it must be a timing issue.
It's ok have fuel & spark but if in the wrong place at the wrong time it won't start. Check that the timing marks to and bottom are correct, the belt could have jumped.
Is it back firing into the inlet when trying to crank? Like a loudish popping noise.
It sounds as if you still have a problem with the anti theft system. Possible loose switch wiring in the dash or it was programmed and cycled incorrectly.
It only has one solid connection with 13 wires going into the module. There is no injector pulse. Computer hook up showed no indication as to why car wont start
×