Ok so when you press a separate button for the others do you feel a click and the button stays in till you press it again and it comes out but when your driver button is pushed in it just come out and doesn't stay in the switch is broken inside and the lock isn't engaging inside holding the button in /or is it that the switch stays illuminated showing its on but no heat from the seat element if that's the case you have to get under the seat cover to the element and possible clean the plug and connector corrosion can get in there from moisture or that element has failed ok
SOURCE: 2008 Ford Taurus X, driver's
hello my name is Lee did you get my info i hit send and went wild let me know
SOURCE: 2008 Ford Taurus drivers seat heater w/n work.
you have elements underneath the seat cover most likely the drivers bottom seat element is burned out, you can check the resistance of it with a on ohm meter there is a 2 wire connector that goes to the backrest and then a 2 wire connector that goes to the seat cushion, more likely its the seat bottom that is burnt out
Check fuses, check connections, check relays, if you get power to heater and it does not work the heater is likely at fault.
467 views
Usually answered in minutes!
×