Turn the key to "on" and let the light flash. It should stop flashing after about ten to twenty minutes. Once the light is on steady, turn it off, then start the car. I usually put another battery on jumper cables attached to the cars battery so it does not run down and die before the system re-arms.
SOURCE: Replaced ignition switch 2003 chevy impala and car will not start
After you replace the ignition switch turn the key to start the car and release leave the key were it stops after trying to start wait 10 minutes until security light goes out turn key to full off position then repeat the above procedure two more times for a total of three on the 3rd attempt to start car wait for light to go out then turn key to full off positoion wait 10 seconds then try to start car body control module should learn new pass code and the car should start.
Big john, J@J Automotive
SOURCE: I replaced the ignition in my 04 chevy Impala and
You have to have the key coded with the ignition switch at a lock smith,or the dealer.
1,372 views
Usually answered in minutes!
key will not come out after car is turned off
how can I fix this
×