2001 GMC Jimmy Logo

Related Topics:

Posted on Mar 18, 2017
Be the first to answer

1. Truck has a clicking noise up front on passenger side. We have already changed the relay switch on the passenger side plus the 4 way flasher, but it is still clicking. It sounds like a blinker and when you put your foot on the brake it stops. 2. The drivers side back brake light does not work. all other lights and blinkers work. Tried two new bulbs and still no go. 3. Truck had a security light on plus it would not start randomly and if I waited 10 - 15 minutes it would start... and I had a ignition sensor put on under the dash on the drivers side. The security light did go out and the truck worked fine for a few days...now everyday 2 - 4 times a day the truck randomly won't start. It always starts after 10-15 minutes of waiting. Hope you can help me

Answer This Question

5 Related Answers

Anonymous

  • 1586 Answers
  • Posted on Aug 14, 2008

SOURCE: Blinkers

I'd try replacing the hazard switch - the relay for the turn signals is incorporated into it. My friend's daughter has the same car as your daughter, and after going through the wiring diagrams, that was the only candidate for causing the failure. We changed it and it fixed the problem.

Ad

Anonymous

  • 2 Answers
  • Posted on Sep 13, 2008

SOURCE: Turn signals and flashers

On mine it was the unit itself.

dennymulford

Dennis Mulford

  • 1055 Answers
  • Posted on Feb 20, 2009

SOURCE: GMC sierra 1500 '96 blinkers and brake lights will not work

i would replace the brake light swtich first its more likly too go bad than the turn signal switch

Anonymous

  • 158 Answers
  • Posted on Feb 22, 2009

SOURCE: blinker blinks all the time lights work normaly

Hello, its sounds as if you have a multifunction switch going out.The turn signal swich. This switch will cause all your lights to go haywire.Thank YOu

Anonymous

  • 71 Answers
  • Posted on Mar 27, 2009

SOURCE: fuse diagram on chevy s10 pickup extended cab.

flasher located at bottom of fuse box its round bout the size of a pop bottle lid,hazard flasher located at top

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

I have a 1998 ford windstar mini van
do your signals work ? listen when signal is on the (clicking noise) when you find that flasher relay is next to it.
Read full answer
Aug 29, 2014 • 1998 Ford Windstar
0helpful
1answer

Turn signals not working on my 98 Mustang. Hazards work fine. Already replaced the multifunction switch. Didn't help.
Sounds more like the flasher to me,in the drivers side fuse panel
square box ,looks like a relay , 5 male spade connectors on back.
Read full answer
Mar 24, 2014 • Ford Mustang Cars & Trucks
0helpful
1answer

WHERE ARE THE BLINKER RELAYS
Hazard flasher Flasher is located: Front seating area, driver side, under dash, mounted on driver side of steering column
Turn signal Flasher is located: Front seating area, driver side, under dash, mounted on passenger side of steering column

Hope helps.
Read full answer
Apr 17, 2012 • 1995 Chevrolet Camaro
0helpful
1answer

How to replace relay flashers on 1996 cadillac
On Cadillac Deville, the Flasher is located:
- Hazard flasher: Front seating area, driver side, under dash, mounted on passenger side of steering column
- Turn signal: Front seating area, driver side, under dash, mounted on passenger side of steering column
  1. Remove the necessary sound insulator panel(s) from under the instrument panel.
  2. Remove the flasher from the retaining clip and disconnect the wiring connector.
To install:
  1. Connect the wiring connector to the new flasher and install the flasher in the retaining clip.
  2. Install the sound insulator panel(s).
If you need additional details, diagrams or some copy about Owners Manual, click it to contact us.

Hope this helps, dont fogetted to rating this answer and leave us a testimonial comment.
Read full answer
Oct 13, 2011 • 1996 Cadillac DeVille
6helpful
1answer

I own a 2003 lincoln navigator. I have a problem sometimes where I go to start my truck and all I hear is a buzzing noise coming from my fuse box on the passenger side of the truck by the passengers feet....
Its the relay in the fuse box by the passenger side floor board. Remove the kick plate and its either white relay on the top (one is mounted horizontal on the right or rear position and vertical on the front or left. Its $6 bucks at Auto zone. You can switch both of them around and the truck will start and run till you get the replacement. Steve
Read full answer
Feb 23, 2011 • 2003 Lincoln Navigator
2helpful
1answer

Where is turn signal flasher located? Emergency flashers (4 way) work, turn signals do not.
TURN SIGNAL FLASHER: The Flasher is located Front seating area, passenger side, under dash, above kick panel, mounted in relay block

Hope helps (remember rated this).
Read full answer
Jul 25, 2010 • 1992 Dodge Dynasty
0helpful
1answer

Clicking noise from the flasher relay when i use blinkers
That's normally a good sign.

I'd just check them out, switch on the 4 way flasher/emergency lights and walk round the car. If they're flashing on all 4 quarters. Its OK.
Read full answer
May 30, 2010 • 2002 Audi A6
5helpful
2answers

Where is the location of the turn signal flasher?
I have a 94 Sonoma and to locate the turn signal flasher, inside, under dash, on left side is a plastic sound protector, mine had 3 screws holding it up, drop this down and straight in you will see a 1" round thing - this is the flasher.
Read full answer
Jan 08, 2010 • 1995 GMC Sonoma
2helpful
2answers

1993 Dodge Shadow...left turn signal won't flash
If the fuses are good and the front and rear bulbs are good, change the flasher for the turn signals, even tho the right is working. If that doesn't fix the problem, it might be in the turn sgnal switch on the steering column.
If both bulbs are good for the backup lights and fuses are good, then the backup light switch, which is screwed into the side of the transmission has to bad.
Read full answer
Apr 12, 2009 • 1993 Dodge Shadow
0helpful
1answer

Flasher relay location 1994 4runner
hi there. I have a 96 4-runner and the relays are under the hood, passenger side on the fender well. Just lift the black cover.

For the signal light, you have to pull out the 4 philips screws and pull the rear lense out to access the bulbs.
Read full answer
Dec 04, 2008 • 1994 Toyota 4Runner
Not finding what you are looking for?

View Most Popular

2001 Jimmy

  • Cars & Trucks

Related Question

I have a 1998 ford windstar mini van

  • 1998 Ford Windstar

Related Topics

210 views

Ask a Question

Usually answered in minutes!

Popular Questions

4.3 vortec engine , engine noise, knocking or

1996 GMC Jimmy

Po446 evap vent code where is the evap vent

2000 GMC Jimmy

Rocker arm torque specs on a 97 gmc jimmy 4.3

1997 GMC Jimmy

I need the firing order diagram for a vortec v6

1994 GMC Jimmy

Firing order diagram for a 2000 gmc jimmy

2000 GMC Jimmy

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...