Pully, no.
You will need to loosen the motor mount however.
https://www.youtube.com/watch?v=011TSb4UEc4
SOURCE: need to find and replace crankshaft position
If you have a 2.0 or a 2.4L engine, it is located on the bottom backside of the motor that faces the cab area. You need to jack the car to get to it because of the low ground clearance of the car. I have a 1997 Stratus and replaced mine already.
Ask if you have more questions.
c17hydro
SOURCE: broke crankshaft position sensor
If you can get a magnet....use it to pull it out...has to be a stong one....like on the back of a audio speaker. That's the part that's stuck right? Is there any part of it sticking out?
SOURCE: crankshaft sensor
2-0L-2.4L I-4 crankshaft sensor mounts to the engine block, behind the alternator, just above the oil filter. 2.5L V-6 crankshaft sensor mounts to transaxle just below the distributor.
SOURCE: 2004 DODGE STRATUS 2.7L, Location of Crankshaft Position Sensor?
it is located on the right side of the motor, in the trans area. Actually in the bell housing.
SOURCE: Replacing Crankshaft Position Sensor 2005 Dodge
Dear,
Next time buy a Honda, you won't have trouble like this.
Allah Akbar!
466 views
Usually answered in minutes!
×