LOCATION TO CHANGE THE PVC VALVE IN FORD EXPLORER SPORT TRAC 2010 2WD 4.0L

copy and paste


https://www.2carpros.com/questions/ford-explorer-2005-ford-explorer-fuel-tank

Question edited for clarity.
Question moved to model category.

Check the link

https://www.google.com/search?q=2005+Ford+Sport+Trac.+Has+a+code+P2004.+I+need+location+of+IMRC+valve+and+solenoid

..

There are videos here

https://www.google.com/search?q=2005+Ford+Explorer+Sport+Trac+TCM+location

..

go to rock auto.com look up your truck then in exhaust and emissions you will find the P.V.C. valve pictures so you will be able see where it is and the hose is there also

Go to rockauto. Com and look up your truck then the part pics are there

The PCV Monitor consists of a modified PCV system design. The PCV valve is installed into the rocker cover using a quarter-turn cam-lock design to prevent accidental disconnection. High retention force molded plastic lines are used from the PCV valve to the intake manifold. The diameter of the lines and the intake manifold entry fitting are increased so that inadvertent disconnection of the lines after a vehicle is serviced will cause either an immediate engine stall or will not allow the engine to be restarted.

Your vehicle is equipped with a "heated PCV" It is located on the back of the intake manifold and has coolant lines attached to it. It must be unbolted from the manifold. (See picture)

behind the intake in the valve cover on passenger side

you have a pvc tube.