Ok try turning the key to the on position dont start it..during the notification chimes step on the brakes repeatedly that might clear the codes the number of chimes in some models tells you what to do if you have the owner manual
Hey just looked up code dumping...on youtube... punch in code dumping...also try disconnecting the battery for a minute..if you cant find the sequence its...on your ignition again dont start it...so it's on-off 4 times after the 4th time u turn off turn it back on and not off again wait and you will see on your dash somewhere codes being reset or dumped
I really appreciate you for helping me out with this matter.
No problem...had similar issues and it's nice to give back in here when people in here try and help me when I'm in a pinch...thnx...
×
SOURCE: I have two codes that come up for my 2005 dodge
Multiple miss-fire and miss-fire on #5. I would first change the sparkplugs then replace the distributor cap and rotor. There is a good chance this will fix the problem, but no guarentees.
SOURCE: How to fix code 1598 2001 dodge stratus
The link below shows Dodge error codes:
https://www.engine-light-help.com/dodge-check-engine-light.html
Your error code indicates A/C Pressure Sensor Voltage Too High.
It probably is due to either a short or grounding of a wire/switch/sensor. Do the things you can do yourself - check all earth wires around the ac unit. Clean and tighten them.
If your ac works fine, ignore the code.
If not - don't waste time and money changing bits in an attempt to solve the problem. Visit a workshop
P0300?? Multiple Cylinder Misfire
P0301?? Cylinder #1 Misfire
P0307?? Cylinder #7 Misfire
are the codes start with the basics inspect plugs wires cap rotor and if all checks out do a compression test
279 views
Usually answered in minutes!
I will try that thanks.
Key sequence on off 4 time and then on and wait
×