The Holden Viva was also marketed as the Daewoo Lucentti and the Chevy Cruze along with a half-dozen other labels around the world. The 1.8 liter engine appears to be one of several "GM Family II" engines so it is not possible to provide a diagram without knowing the specific application you have.
https://en.wikipedia.org/wiki/Daewoo_Lacetti
https://en.wikipedia.org/wiki/GM_Family_II_engine
SOURCE: SPARK PLUG CHANGE 98 volkswagen jetta gl
you will need the tool made for pulling the boots off but then all you need is a 3/8 rachet ,about a foot long extension, a universal , then probably 13/16 spark plug socket <could be peanut plug depending on the manifaturer of the plugs> I recomend using bosch or ngk plugs. intake removeal is not needed ....will clear all plugs with intake on but may need to unplug a couple injectors for clearance but don't forget to plug them back in
SOURCE: change sparks plugs on 06 hyundai sonata v6
You didn't specify whether you have the (4) cylinder or the (6) cylinder engine..... I have a 2004 Hyundai Sonata 2.4L 4 cylinder and I just changed the spark plugs in it. I believe that the 2005 2.4L engine is the same. To locate and change the (4) spark plugs on a 2004 Hyundai 2.4L 4 cylinder engine: Remove the (4) 12mm bolts from the decorative plastic engine cover. Remove plastic cover from engine and place it off to the side out of your way. Standing in front of the car, the (4) spark plugs are located laterally (left to right) in the recessed area underneath where the plastic engine cover was removed. Note: This engine has (2) coils....They are located above spark plugs number (2) and (3) from left to right. Starting with the fist spark plug on the left: Remove the spark plug cable by pulling straight up on the insulated connector. Using a spark plug socket, remove the old spark plug and install a new one in it's place. To access the second spark plug from the left, remove the electrical connector and the spark plug cable wire from coil number (1) and then remove the (2) 12mm bolts that secure the coil to the engine. Spark plug number (2) is located directly under the coil. Lift the coil straight up removing the insulated connector from spark plug number (2). Using a spark plug socket, remove old spark and install a new one in it's place. Repeat same procedures for spark plugs number (3) and (4). Note: If you have the (6) cylinder engine, the front (3) sparks pluge are readilly accessible but in order to access the (3) rear spark plugs, you will have to remove the intake manifold
SOURCE: Can't get metal spark plug covers back in to place
how to take spark plug wires off 2003 yukon xl
SOURCE: spark plug wiring diagram
If u can't see the diagram go to the link, just match up the numbers on the coil to the engine cylinder numbers.
http://autorepair.about.com/library/firing_orders/bl-fo-5630.htm
SOURCE: diagram of spark plug
Check this for 4.6 or 5.4 sizes engine...
2004 Ford Expedition 4.6 liter V-8 VIN "W"
2004 Ford Expedition 5.4 liter SOHC V-8 VIN "L"
Hope this help (remember comment and rated this).
Testimonial: "thanks for the info. I worked like a charm"
355 views
Usually answered in minutes!
×