How do i reset the computer on my 2002 pontian Bonneville so the security light will go off and my car will start? Or is there another way to get it to start? I have my keys, both my original and spare. I had lost them and had someone try to pop the igition for me so i could drive it and it didnt work, now my keys wont even work! Please help me

SOURCE: 1995 Pontiac Bonneville

you have a bad key or bad security relay

SOURCE: 1994 cutlass supreme--security light on--car won't start

take to dealer and have them reprogram the computer

SOURCE: 2002 Monte Carlo wont start

sounds like your passlock sensor on the ignition barrel is faulty. you will have to go to the dealer to have it replaced because of the programming after replacement.

SOURCE: My Spare Key Won't Start My Car

ok well here's the thing. This key has not been used before. The keys are cut to the specs of the ignition so they may be undercut so to speak. I know on my car i can turn it upside down it will work. But on the other hand it could just possibly be a back up for when you lock your keys in your car (not likely but it's still possible). You can keep putting your key in and out a bunch of times and **** the steering wheel back and forth as you turn the key to get it used to the ignition switch. See if that works and if not i will see what i can come up with in the meantime for this exact car.

SOURCE: lost original car alarm control... need to reset a new one...

programing a Nissan remote , is hidden secret by Nissan Dealers. As a Nissan Technician i will share it.

Just get in your vech , close all doors. Using your power lock switch , lock all doors. After doors are locked take your Ignition Key and insert it and remove it from ignition switch in a slow fashion , but consitant pace. (97 and earlyer are fast) When you see the hazzard lights flash, put key in ignition switch and turn to the On postion .. Do NOT CRANK or you will have to Start over .. After in the On postion .. Hit the Lock button on remote... Hazzard lights should flash..( note..you have to reprogram all remotes when adding a new one , if you don't your old remotes will not work ) If your doing just the one , turn igntion switch off and unlock door and get out and try it. If you are doing more than one. While still in Vech with Key on . After you hit the Lock button on Remote and hazzard light flashed .. with key still on .. use master lock switch unlock doors and relock and then hit Second Remote, Lights should flash again , repeat if adding a 3rd remote.. after done just turn key off and unlock door and get out and try.