Hello. I am looking for a company selling dumpster covers. I need to buy several sets as soon as possible. Any recommendations welcome!

You wait at your own risk. The cover is there to prevent anything from getting caught in the flywheel teeth. While the possibility is slight, is does exist. I would recommend you replace the cover as soon as practically possible. If you must drive it in the interim, avoid driving in places where items are more likely to be thrown up, such as gravel/dirt/stone drives, etc.

Hello, You are going to need the Brand of canopy to get a replacement part. Ford buys its parts on the aftermarket when it comes to anything like this. Usually the Dealer will arrange the purchase and installation of anything going over the bed.

I looked up the CFS 060902 and it can be the component number for the bigger thing. There were some sites like Range Rider.com>gates and canopywest.com. But you will see different styles within the Brand.

If you are the original owner, or can find out through the Vin# who the selling Dealer was to the original owner, you have a good chance of finding the local supplier of the cover. Some companies like American Sunroof are not in existence anymore or are not what they use to be. Then you need the style and Year of the part to be the same.

I had access to the main Warehouse for Ford and I can tell you, Ford does not stock this type of part. I tried to find this for you and hope my solution is very helpful in determining your next move.

If this is some sort of Insurance damage repair then the Insurance company would probably have to buy you a new cover if there are no spare parts like you need.

Hello and welcome. if this is almost always the ignition control module that sets on top off the coil pack. I have seen several of these do this. here is a picture of the control module

Hello, my name is Ben. The only way to re-calibrate your vehicle's speedometer is to have the Powertrain Control Module (PCM) re-calibrated, either by a GM dealer or someone who has the capability to connect with the PCM and change the settings. Several companies sell units that are supposed to be able to re-calibrate the PCM, I have never used one but if you buy from a reputable company it is probably okay. SuperChips has one they call a TirePaq, but they are vehicle specific, and more expensive than a dealer. I suppose it depends on how much you like gadgets. I hope I have answered your question, sorry there isn't a cheaper way.

you should look at Napa auto parts or similar stores and ask for a Hanes or a Chilton manual for your car, they are 2 companies that publish some pretty informative how to manuals for vehicles, they have a wide selection of vehicles they cover going back as far as the 60's as far as i know

yes there are many companies that sell window kits to convert the car, as far as the diff noise goes u need a load of special tools to do this repair, by the time u buy all the tools to set the gears up correctly u could pay someone to do it. Do you still want to do the diff gear set?

There is a company called coverlay that sells a fitted cover for your dash. You can go to there website and search your vehicle to find the right one and the right color.
Here is the info from there website:

98-01 Dodge Ram Pickup Dash Cover 22-802L

Fits:
98-01 Ram 1500 (with airbag)
98-02 Ram 2500, 3500

This dash cover is custom formed to the exact shape of your orginal dash. It is installed over top of the orginal dash, and is held in place with silicone adhesive (provided). The installtion can usually be completed in 30 minutes or less. No special tools are required. No original parts need be removed. Dash covers can be purchased in several standard colors.