It's located on the back of engine block towards the transmission housing behind a metal heat shield.
SOURCE: 2003 3.7 Liberty check engine light for crank sensor
2003 3.7 Liberty check engine light for crank....what? sensor? You have scanned it?
SOURCE: I have a 2000 hyundai Sonata, 6 cylinder eng. My
The sensor is located on the left hand rear side of the block (near the bell housing). It is held in place by a 10mm bolt. It's to the right of the exhaust manifold (LH - radiator side) on the V6. Once you purchase the new sensor you'll be able to identify it on the engine. The connector to this sensor is located in the illustration.
A word to the wise... replace the O2 snsr as well.
SOURCE: location of cabin air filter
It can have a cabin air filter, but most vehicles ship without it.
Either way, you can access the cabin air filter housing by opening the glove box all the way (squeeze the sides so it clears the stops).
The filters are around $15 at the dealer.
Whether or not there's a cabin filter installed, make sure you're also
following Chrysler's recommendations in the owner's manual—running the
air on recirculate all the time will encourage mold and bacteria to
grow.
Good luck
SOURCE: 2008 Jeep Compass: Possible Electrical Problems...
I am having the same problem. Did you ever get it worked out? I would appreciate any help that you could give me.
Thanks,
Robert
[email protected]
217 views
Usually answered in minutes!
×